Robert Tyrrell
Gas Engineer
- Messages
- 701
Any idea where I can get one of these? The 8 bar part not the rest. I used to have a supplier bookmarked but somehow I've managed to delete them and now I can't find a replacement.
- Thread starter Robert Tyrrell
- Start date
- Replies 5
- Views 2K
- parts these thread where
Discuss UVHWC parts - Any idea where I can get one of these? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 34,361
- Solutions
- 2
Is it me or does the over pressure discharge looks like it's going up hill
And +1 for aw
And +1 for aw
- Messages
- 8,642
8 bar !!!
- Status
Reply to UVHWC parts - Any idea where I can get one of these? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Creating content since 2001. Untold Media.