Search the forum,

Discuss Vokera excell 80 sp combustion door seals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Deleted member 32524

Plumbers Arms member
Plumber
Gas Engineer
Messages
725
Hi. Picked up new combustion door seals for this earlier and chucked them in van, just checked them and there is only 3 strips in bag about 1m long. Anyone know if I will get away with 3? Looks to me like I would need min 4 to do it all. (Did ask for 5 but spoke of the three doors, think he has not understood what I ment.)

Could hopefully get more before I go, but could do without a visit to the merchant tomorrow as I am really busy and already have all of what I need for the day. Or thought I did.

Thanks,
Dunc.
 
You should have 1 x vokera part number 5905 and that should do the whole combustion door mate
 
Status
Not open for further replies.

Reply to Vokera excell 80 sp combustion door seals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
306
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
393
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
523
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
283
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock