Discuss Water meter burst geyser in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I am from South Africa, yes that water meter have got a build in non return valve. but isn't it the job of the PR Valve to reduce the pressure? and the distant between the water heater and the PR valve sure must also be taken into account for expansion, or do I miss something here?
 
The Body corp of the complex asked me to fit the meters and they paid me.
 
I would also have fitted it in that order because that is how we always do it, but this housing complex is like a estate, and where the water supply enters every house hold we had no space between the PRV and the point of entry and the PRV had a build in shut down valve which we used to shut down the water to each home
 
Hi there what water authority area are you in ..brum
 
I think you do miss something are you saying this is an electrical water heater connected straight in the water main with only a NRV and no expansion vessel, if this is so its no wonder it burst, lets have more details please or we will be off on a guessing game
 
think i get the issue now, water meter has a non return valve, as did the prv fitted originally, and the water heater has burst, was the heater relying on expansion within the cold water feed rather than using an expansion vessel and pressure relief valve. Hence the insurance companies get out of jail card if that was the case, seeing as you were the last to fit on an already poorly designed system.
 
All the water heaters are installed inside the ceiling, which is far from the water meter
This is what the installation look like
0

There are 83 meters installed and 1 is to blame????
 
Pressure reducing valve regulates how much pressure is available in the line. Water line from the city may have 100 lbs. in it but there is a reducing valve right inside the house so that the pipes in the house only get 40 lbs. in them.
 
Status
Not open for further replies.

Reply to Water meter burst geyser in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
219
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
443
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
220
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
257
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper...
Replies
2
Views
246

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock