1/4" from the bottom of the cistern sounds a tad tight, but not excessive. Just to make sure though... wedge a pencil between the cistern and the underside of the siphon and try flushing again. I'd just want to be sure the vacuum of the siphon isn't pulling the siphon up against the cistern floor.
- Thread starter Boilersuit
- Start date
- Replies 40
- Views 5K
- flush toilet
Discuss weak toilet flush in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Reply to weak toilet flush in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Similar plumbing topics
Hi all
Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes.
For toilet I was going to go straight down...
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Newest Plumbing Threads
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 5
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 2
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 4
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2