Search the forum,

Discuss Whats happened to the look of the forum in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Did not hear back from the rich customer after the quote of £3.7k to do the long gas run in 35mm copper pipe !

Been busy with other jobs , and had a slow week (and have me a chance to relax as from next week going mad again )

still dont like like the Argos look of the forum
 
Not quite!!!

but i spent 3 years atleast one day a week working in 2 million + houses!!
ive also been brought up around quite a few extremely wealthy people too, that teaches you allot.

Likely hood is customer will now know the score from you on the boilers + gas run.
he will find a fool to connect onto the existing and sting them on the gas run when it doesn't work.
 
So that's the first type of rich? Greedy, manipulative and a non stop stream of shister! Other one is old money!
 
Stan you know that money dosnt make a family Rich Or poor! It's a family!

unfortunately we live far far away from home :( and it's sad on a family days when we are not with the ones that matter the most .....
life ain't easy .....

But fick them , if someone is happy to do a gas run cheaper then good luck to them
 
I live about 300 miles from my family. (Wife and 2.4 obviously live in hoose) but it's difficult as feel like kids missing out on grandparents ect. Only see them every few months. That's why wanted to move down your way?
 
I live about 300 miles from my family. (Wife and 2.4 obviously live in hoose) but it's difficult as feel like kids missing out on grandparents ect. Only see them every few months. That's why wanted to move down your way?

Make way home pal , you will never look back ! There is work for everyone always + you have your contacts already ......
 
I live about 300 miles from my family. (Wife and 2.4 obviously live in hoose) but it's difficult as feel like kids missing out on grandparents ect. Only see them every few months. That's why wanted to move down your way?


Move to kent we can do business 50/50
 
Can drive down in one of them nice 400s for me with your 200 in the back. Make it quick got a busy one next week
 
200 is gr8! It's a toolbox. Can fit a boiler Or small unvented as well
 
Problem is I keep too much in a van to be able to use a small van. Do a fair amount of out of hours work so need to keep stock up as merchants refuse to work the same hours. Have to keep first time fix high as the opportunity for return visits is few and far between. I did think about down sizing for cost saving but couldn't make it work. So decided to loose roof rack and tube carriers to save fuel instead
 
Just to note people, if you see words being highlighted and ads popping up out of them when you hover the mouse over them, then that's a thing you can turn off.

Hit Settings at the top of the forum, then general settings in the sidebar to the left, then scroll all the way to the bottom and uncheck the following "Skimlinks" option.

Screen Shot 2014-04-09 at 10.47.30.jpg
 
Status
Not open for further replies.

Reply to Whats happened to the look of the forum in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
143
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
143
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
348
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
216
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
482
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock