P
PerryGorr
Hi, I have a central heating question.
I'm thinking of having a wood burrning stove with wrap around boiler installed to run a few Rads. Hunter 8 possibly.
I do not want to produce DHW using this system, all the diagrams I have seen incorporate a DHW cylinder on the gravity circuit...
Is it obligatory to have a DHW cylinder ? I assume not as not everybody would want the capacity to produce DHW.
If it's not obligatory, then the gravity circuit upto the header tank and heat leak rads would be in 22mm copper ? and I could tee off in 15mm to a pumped circuit for the other rads ?
Thanks
Perry
Thanks
Perry
I'm thinking of having a wood burrning stove with wrap around boiler installed to run a few Rads. Hunter 8 possibly.
I do not want to produce DHW using this system, all the diagrams I have seen incorporate a DHW cylinder on the gravity circuit...
Is it obligatory to have a DHW cylinder ? I assume not as not everybody would want the capacity to produce DHW.
If it's not obligatory, then the gravity circuit upto the header tank and heat leak rads would be in 22mm copper ? and I could tee off in 15mm to a pumped circuit for the other rads ?
Thanks
Perry
Thanks
Perry