Search the forum,

Worcester 28cdi pressure guage up and down hot water intermittent

Post new thread

Discuss Worcester 28cdi pressure guage up and down hot water intermittent in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Super Mario

Super Mario

Gas Engineer
Messages
161
Prv was leaking so ive replaced that was at 1 bar keeps goin up to 3 bar making banging noise hot water intermittent going luke warm any ideas cheers
 
Take it you recharged vessel to about 1bar when it was drained. Checked if any heat going down the CH pipes when dhw demand. Blockage on hex making burner cycle on and off.
 
Sounds like she plate with a hole innit. Turn off the cold to the boiler and see what happens...
 
Status
Not open for further replies.

Reply to Worcester 28cdi pressure guage up and down hot water intermittent in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
161
Lou
Lou
T
Hot water so hot tap and shower via our hot water tank
We have hot water, tank for hot water why is the hot water boiling hot from tap,and shower, We are on a schedule for hot water via our hive app 2hrs in morning 2 hrs in evening Any help be much appreciated
Replies
4
Views
254
Rtplumb
R
S
Why pressure gauge drop without leak
I have done pressure test for 2" high pressure pipe line by closing the pipe with rubber plugs at the ends. It was 3 bar and I kept it for 24 hours. Its shows a pressure drop of 0.5 bar. The pipe line is fully exposed and I couldn't find any leak on them. What might be the problem. If somebody...
Replies
6
Views
199
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
237
PSxxxxxx
P
SnosRap75
Boiler losing pressure only on central heating
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
213
SnosRap75
SnosRap75
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Contractor Forum
Tile Talk
DIY Forum
Tilers Talk
Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock