Discuss Worcester Bosch Heatslave 26/32 Hot Water Problems in the Oil and Solid Fuel Forum area at PlumbersForums.net

Maybe been unlucky - Ive done a few and always come out in one piece.

A bit like closing the door after the horse has bolted I know, but I'd fit a system filter to remove any loose debris floating round

Some have been right Thomas Wats.

Fitted a filter this morning. Ran for an hour and nearly full.
 
Thank you. As you think it will have old type valve which might come out in pieces can you confirm that this is the part that I might well need:

Diverter Valve Cartridge 87161051320

 
I had a system earlier in the week that the mid position valve was so jammed up it wouldn't shift from the mid position
 

Reply to Worcester Bosch Heatslave 26/32 Hot Water Problems in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
270
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
223
Hi, Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably...
Replies
1
Views
171
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
290
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
397
Back
Top