Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Worcester Greenstar 24i issue in the USA area at PlumbersForums.net

Messages
3
Hello - just wondering if anyone has any ideas why my Worcester 24i combi boiler doesn't heat the central heating water? It heats the tap water just fine but when the demand comes in from the room thermostat for the central heating to turn on - nothing happens... I've checked the demand from the thermostat is reaching the circuit board (240VAC upon request). I can see the diverter valve moving up and down during switch-on, so that seems OK, I've changed the mains circuit board so that doesn't seem to be the problem either. The blue indicator light is on steady and doesn't flash to show any errors. What I've noticed is that if I put the unit into 'maintenance mode' the central heating works and the radiators get hot, so it seems that the basic functionality of the system is OK... I suspect I have a faulty sensor somewhere but looking at the circuit diagram, I can't see an obvious culprit....

Any thoughts anyone?

PS I think the gaskets at the top and bottom of the heat exchanger may need replacing as they are 'oozing' out (see pics)- but not sure this has anything to do with my CH problem?
 

Attachments

  • IMG_0925.jpg
    IMG_0925.jpg
    61.3 KB · Views: 24
  • IMG_0926.jpg
    IMG_0926.jpg
    48.7 KB · Views: 24
  • IMG_0927.jpg
    IMG_0927.jpg
    53.8 KB · Views: 23
I think you’re boiler needs a service with the condition of those gaskets. I also urge you to stop messing around with a gas appliance. Did you perform a flue integrity check on the boiler after removing the cover? It’s a public open forum, it prevents us giving gas related advice to diy.
 
I think you’re boiler needs a service with the condition of those gaskets. I also urge you to stop messing around with a gas appliance. Did you perform a flue integrity check on the boiler after removing the cover? It’s a public open forum, it prevents us giving gas related advice to diy.
You may well be right about getting it serviced by a Pro, I've given my wife more than enough time to get it fixed and she's clearly out of her dept :)
 
Tbh I would phone Worcester up for a fixed price repair as the heat engine looks Goosed / leaking they do have a 10 year warranty on them (the heat engine)
 

Reply to Worcester Greenstar 24i issue in the USA area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
205
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
281
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
271
PSxxxxxx
P
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
426
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
327
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock