Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
View the thread, titled "Today's install." which is posted in UK Plumbers Forums on UK Plumbers Forums.
S
sam51
nice tidy install there mate.
wannabe plumbers take note.
wannabe plumbers take note.
Have to say mate your work is the absolute dogs ********. Teach me please lol
G
Guest123
Nice neat job.
If you've used the wee Talon spacers, you'll get foam insulation around the pipework without too many problems. Use tie wraps to bind it nice and tight.
If you've used the wee Talon spacers, you'll get foam insulation around the pipework without too many problems. Use tie wraps to bind it nice and tight.
W
Whyme
Niiiice, Boiler erm a ferroli..😉
S
sam51
plumbersmate. this ain't rocket science,
first you need teaching, then a g3 cert,
and then do it how you want to see it in your own house,
if your not happy take it out and start again.
forget about the money,a good job is what it is all about.
a nice tidy job, a safe install, and a happy customer,life's sweet.
That'd ruin any install!
I only started using them about a year ago, make jobs where you have to lag so much easier.
G
Guest123
They also save bending crossovers if you use 2 spacers on a clip as the pipe will then pass right over the other one without touching it.
R
REDSAW
c'mon!!!
admit it, you get paid by the hour dont you?.
bet you get lunch breaks too!!.lol
admit it, you get paid by the hour dont you?.
bet you get lunch breaks too!!.lol
K
Kev the gas
Nice work, have you measured where the guttering stops outside ?
W
wheeto
Ha ha that's going to be the second thing to get him worrying in this thread!
Nice pipework though.
well done you are almost good as me 🙂pmsl
You have had lots of time to pull all this bends and how is the insulation going in !?
well done good job
You have had lots of time to pull all this bends and how is the insulation going in !?
well done good job
and dont get me wrong but i hope is not me who is going to change the immersion one day
S
sam51
i thought the only pro"s in london were in soho lol.
V
vern
Nice work pal.................. that coil will be a biatch to bleed even on a sealed system, due megaflos coil in coil construction, unless i have missed the AV?
Flue must be close to soffit?
Flue must be close to soffit?
half a mornings worth of work there plenty space to work in unlike the one i done today ,
agree with vern cant see aav nor low level doc??
agree with vern cant see aav nor low level doc??
V
vern
I missed that too!
doc? drain of cock?
lol turning into pick a fault this , flue's probably termining into neighbours window lol
Was just going to put vent on top of boiler, do megaflow specify otherwise?
flue easily clears gutter/ soffit. The drawing is a rough outline.
We'll see for sure tomorrow, it's changeover day.
fair play to you for putting your work on here knowing what this mob is like !!!
Did you wipe your joints off or are they all green today?
Did you wipe your joints off or are they all green today?
Anyone got a noose I can borrow?
T
TomLane
Amazon?!?
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Today's install." which is posted in UK Plumbers Forums on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
