Roca "The Gap" close coupled , back to wall toilet.

robertrobinson · Apr 26, 2014

Hi , any of you plumbers fitted this toilet? I've done about 5 now and have had leaks with them, cistern doesn't bolt on , just sits on top of pan and two screws at top hold in place , it has the plastic assembly to transfer water from cistern to toilet. Any experiences would be helpful, cheers Robert.

Aquablu · Apr 26, 2014

Hi Robert. If you're talking about the gap cleanrim. I have found the pan needs to be fixed to the wall as well as the cistern. Also that the flush pipe cones need to be siliconed as they have a tendency to turn. It's a bit of a weird one!!!

robertrobinson · Apr 28, 2014

hi Aquablu, thanks for your reply, there is a cone goes into the back of the toilet before flush pipe goes in , there was a second cone, is this used aswell? instructions not to clear on this? cheers robert

Aquablu · Apr 28, 2014

From memory I think that flush pipe has a cone top and bottom. It really is a funny design!

robertrobinson · Apr 29, 2014

Just an update, finally got Roca today , the small flush pipe assembly between toilet and cistern has been troublesome and an updated replacement is available through Roca or supplying merchant (re Roca The Gap clean rim)

Aquablu · Apr 29, 2014

That's useful information, thanks for letting me know.

Roca "The Gap" close coupled , back to wall toilet.

View the thread, titled "Roca "The Gap" close coupled , back to wall toilet." which is posted in Boiler Advice Forum on UK Plumbers Forums.

robertrobinson

Aquablu

robertrobinson

Aquablu

robertrobinson

Aquablu

Official Sponsors of Plumbers Talk

Similar plumbing topics

Featured Content

Thread statistics