Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Search results

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  1. T

    90mm water mains

    Will take one next time im there Shaun.
  2. T

    90mm water mains

    Waiting for the water board to do an inspection first. Picked up that plasson fi adapter from drain centre in luton, very nicely engineered those larger plasson fittings, better than the domestic sized ones.
  3. T

    Am i missing something?

    As said, pump is only for secondary so should be bronze or stainless, fit a ups15-50n or a dab bronze pump, i dont like the wilo sb30 bronze pumps, they dont seem to last long. Quite worrying you didnt spot this straight away as this is basic stuff, it has nothing to do with dhw flow rates at...
  4. T

    Installing a BTTW pan w/ rigid pan con?

    I always use ridgid pan cons even on btw or close coupled closed backs. Measure twice etc and push pan con onto pan first and silicone spray pan con and inside of 4". Also as a tip, leave toilet seat til last then to check its pushed home fully i hold a torch over one of the toilet seat fixing...
  5. T

    Brötje Boiler

    They may well be good, but they dont have a presence over here by the look of it which means no backup support etc
  6. T

    How heavy is yours?

    never weighed my bag but its heavy enough for me to have broken 2 shoulder straps when the d rings have opened up under the weight of it! (Stanley fatmax open tote) I bought a veto OT XXL last year but I sent it back, although the quality is amazing, the weight of it empty was too much...
  7. T

    90mm water mains

    I assumed u could use a mech philmac/plasson FI adapter type fitting on it then mapress off that but I suppose I wanted to know if commercial boys would see this as a bit of a bodge rather than using fusion weld flanges and coming off of that, if thats the proper way to do it then I would get...
  8. T

    90mm water mains

    Me neither, i went to ask when they were bringing the water main in so i could valve it off etc. Site manager said its in, i said no its not theres just a duct there... turns out what i thought was a duct was the water mains, which has been concreted in the slab, no duct lol.
  9. T

    90mm water mains

    The job im on at the minute has had a 90mm water mains run into the building which I need to put a stop tap and double check valve on for water board to inspect and then connect up. Its massively oversized for what its serving, 32mm would have been plenty. The biggest mdpe ive ever...
  10. T

    Joint compound

    I use Jet Blue aswell, same as the jet lube and the regin gear, but the tub is better and less prone to getting smashed which is why I use it
  11. T

    Recognise siphon?

    its not a syphon :) Would it be a bad job to change to fluidmaster Ash?
  12. T

    Quick one; Delonghi rads... any good??

    Got Delonghi rads in my house, think i got them from city plumbing at the time. Seem fairly deecent, white square things they are...at least they dont have those white plastic covers stelrad use by the plug and vent that get dirty easily.
  13. T

    Advice Appreciated Please

    Cotswold vulcan to be specific
  14. T

    Advice Appreciated Please

    I like lakes enclosures too...either them or simpsons. I fitted an eastbrook cotswold 1200 slider last week, absolute rubbish. Normally eastbrook stuff is quite good but this was terrible, i assume its there cheapest range...5mm glass.
  15. T

    Recognise this flush button/mechanism?

    Looks like Gerberit to me
  16. T

    Underfloor heating system design?

    I should have said last night that I meant timber floor.
  17. T

    Underfloor heating system design?

    You wouldn't use liquid screed on the 1st floor though would you?
  18. T

    New backnut design?.....

    yes best, you just do the backnut up finger tight and then do the screws up, the one I mentioned in my post before is a 2 piece design with a separate brass ring that the screws push onto to stop the basin cracking, I assume the one in the picture is the same
  19. T

    New backnut design?.....

    The thermostatic taps you get in the contour 21 doc m packs have these, great design
  20. T

    What the quickest/easiest way to cut this stuff?

    aviation snips

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Sponsors

Electric Underfloor Heating The Wetroom Store Heating 2 Go Electrical Goods - Electrical Tools - Brand Names Official UK Plumbers Forums Facebook Page Gas Talk Group | Gas Safe Register Plumber Workwear Specialist

Featured Plumbing Threads

VividPromotion Workwear
Top Bottom
Back