looked at a job today old neta heat in kitchen and cylinder cupboard abot 15m away with pump and valves in there problem is vent and cold feed are at high and low level to the boiler so not teed in to the airing cupboard (tank is sort of half way between the two)im thinking system boiler but the...
the problem with running it up and over a six foot fridge is the amount that drops back into the base of the machine when the pump stops the non returns vaves on wm's will allow it to seep back and you can get water in the bottom of the drum
some machines will pump that high older meile's...
weve had this argument before and as ray points out a big part of the heating market is housing associations and other companies that dont need registration as they dont fit the items
prv and condense are wrong prv needs to be in copper all the way and condense needs to be sealedthe bending on the copper is excelent but unnecessary the copper should be on the wall and the plastic shouldnt be there he has made a simple job difficult
as the name implies gas safe's main aim is safety and by effectivly banning inspections of unregistered installs i feel they are not
scenario 1 lanlord has boiler fitted by joe blogs then moves in a family they ask for gas cert and landlord keeps putting them of but he is tryoing to get it done...
Flow is how many liters per minute coming out of a pipe presure is the force its being expeled by
think of a pressure washer with hose open and the tap running lets say for instance you have 5 liters a minute coming outat a pressure of 1 barbut flow willl be a lot less when you connect the...
appliance pumps are only powerfull enough to lift to the top of the appliance from there it should run downhill to the drain connection in practice often the best you can get is level for a while and then down
going along the floor and then up increases the amount of water your tring to pump and...