Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Search results

  1. SlimD

    Baxi solo 2pf turns on off on off repeatedly

    When it starts up the fan comes on for half a second then off, then on, off, on, etc... Air pressure switch seems to be making. Both overheat & thermostat ok Potentiometer?
  2. SlimD

    Remeha Avanta 18v fuse holder

    I'm guessing I'd have to remove the pcb to check that first?
  3. SlimD

    How do you approach fault finding??

    £200 for the 3 together or £75 each
  4. SlimD

    Remeha Avanta 18v fuse holder

    Not too bad but will any similar sized fuse holder do?
  5. SlimD

    #novanber Let’s stop van theft/tool theft

    Manufacturers can play a much bigger role in preventing van tool theft. Some vans are so easy to break into (various examples on YouTube) that you might as well advertise "Free tools here" on the side of your van. If manufacturers put a bit more thought and effort into physical security of their...
  6. SlimD

    Remeha Avanta 18v fuse holder

    Thanks but I should have said I've already trawled through their website and the local electronics shop.
  7. SlimD

    How do you approach fault finding??

    I've just been on the BAXI FF course, finished it yesterday. Very good! Instructor was very experienced so knew boilers inside out and there were a range of boilers to work on. Course consisted of How a Combi works (sequence of operation etc...), Boiler diagnostics and Multimeter Training. Final...
  8. SlimD

    Remeha Avanta 18v fuse holder

    Anyone any idea where I can get a fuse holder for an Avanta 18v? It's the 2AT fuse that sits on the PCB. It's sprung and has this silly little metal hook that holds it in place once you twist it. Tiny hook snapped off so fuse wont stay in board so boiler wont run unless you hold the fuse in. My...
  9. SlimD

    Kohlengaz K2N18 manual

    Thanks. Tried that but don't know how long before they'll reply. Just wondered if there was one available anywhere else?
  10. SlimD

    Kohlengaz K2N18 manual

    Hi anyone know where I can get hold of an installation manual for a Kohlengaz K2N18 gas fire please? Can't find one anywhere!
  11. SlimD

    Ecotec ignition failure f28

    I did also get an f29 come up on one occasion, hence my thoughts it was the gas valve
  12. SlimD

    Ecotec ignition failure f28

    No the fan runs fine that noise is coming from the burner chamber
  13. SlimD

    Ecotec ignition failure f28

    Gas inlet pressure was 22mbar
  14. SlimD

    Ecotec ignition failure f28

    Yes I took the snorkel off, made no difference
  15. SlimD

    Ecotec ignition failure f28

    Thanks Chalked. Yes got an analyser. I have a Multimeter but it is something I need to master. Using them is something that's covered on the faultfinding course I mentioned earlier.
  16. SlimD

    Ecotec ignition failure f28

    Dropbox - Video 13-12-2017, 16 58 47.mov Hoping this will work. Link to the video.
  17. SlimD

    Ecotec ignition failure f28

    Sorry not sure how you do that when posting. I do struggle with posting on this site tbh
  18. SlimD

    Ecotec ignition failure f28

    Hi guys, I'm after some advice from the more experienced gas guys. I've been GasSafe for just over a year - qualified via an intensive course (which I know some of you guys have a downer on) after redundancy. I make no claims of understanding everything about boilers as a lot comes with...
  19. SlimD

    Joining 32mm waste to 25mm mode pipe

    Have you considered a macerator like a saniflo to pump the waste away. I don't know if it'll work over a distance of 40m with a domestic one. Maybe a light commercial one would do it. With most domestic macerators they pump out through a 32mm pipe. Might be worth looking into.
  20. SlimD

    Combi boiler installation

    That waste pipe could be an old terrain pipe with crap on it. Just the photo making the colour look off so it gives the impression it's copper. But if it IS copper then WTF?! Looks like he's just stuck 22mm on the old existing 15mm for the last stretch. I'd have been inclined to replace whole...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Sponsors

Electric Underfloor Heating The Wetroom Store Heating 2 Go Electrical Goods - Electrical Tools - Brand Names Official UK Plumbers Forums Facebook Page Gas Talk Group | Gas Safe Register Plumber Workwear Specialist

Featured Plumbing Threads

VividPromotion Workwear
Top Bottom
Back