Thanks!
Probably go electric with cooking and solid fuel on the fires.
As I said can get away with total 65 kw and done pipe sizing and gone overboard and it works out 35mm.
Hi all.
We are doing a large renovation with one 40 kw boiler which will run a 5 bed house and one 30kw boiler that runs a b&b annexe with 4 bedrooms and en suites.
One range cooker and one fire also.
My customer is trying to fill out the new application form for a new supply and they want...
Do any of you use the Anton APM150 for domestic gas?
I want to know if this model is suitable for fan pressure testing i.e. If they read negative pressure?
Thanks
If you are serious about your work and customers and adhere to the rules and regs you won't go wrong. Do your homework and training and it will be a piece of cake. Cut corners like some and it ain't gonna work!
As mentioned inserts are used on soft copper but we use flared fittings where possible.
Basically my friend the coil in the hot water cylinder has a hole in it through corrosion so domestic water is entering the primary side and up into the header tank.
You need a new cylinder- simples
Just had one. Fuse is ok on the board but changed the board and its fine. These go for a pastime they are crap! You an get recon on fleabay!!!!
Nearly every one that goes it's always often the board!