Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Search results

  1. MikeJhn

    Perrymatic Jestreme MkII intermittent cutout. Any help? Or a manual?

    Older thread I know, but just for information the Riello manufacturers web site has all sorts of information re pump pressure and nozzles size's etc: just for information also the Perrymatic Jetstream boilers in BF configuration have the air supply routed around the outside of the boiler casing...
  2. MikeJhn

    Air to air heating

    Being older than most on here probably I can remember them being called "Split units" and then "Split unit Comfort cooling with heating" Air Conditioning was outside compressor and condenser units ducted into the building with ceiling mounted air distribution box's, seems that we have fallen...
  3. MikeJhn

    Newly fitted isolation valve keeps leaking

    I think it's indicative that more threads are showing on the bottom nut than the top, did you use the correct olive on the bottom of the isolation valve, way forward is to change the fitting with the respective correct olive's, will be difficult if you have necked the copper pipe by over...
  4. MikeJhn

    How adjust ballcock in my attic

    Before you do any of the above push the float down below the water level to flush what may be a bit of dirt on the washer, note you will get water flowing out of the overflow which in turn may impact a path and in this weather may freeze and become a hazard.
  5. MikeJhn

    A leak I cannot get to! What to do in this situation!?

    Looks as though its a back to the wall pan, suggest you draw around the pan onto the wall to see how much you can cut away after removing the pan for access.
  6. MikeJhn

    A leak I cannot get to! What to do in this situation!?

    If it is a hole in the cistern than drill out to size of a SS nut and bolt and rubber washer on both sides will cure it.
  7. MikeJhn

    New Riello rdb oil pump not working.

    Plus one on the bypass screw, but I can't think that Riello would not have mentioned to check that?
  8. MikeJhn

    Toilet Syphon

    Visqueed is a good shout, if you have a building site nearby ask if you can skip dive for an off cut, used as DPM under concrete floor slabs.
  9. MikeJhn

    Mains Cold Water Supply - Think I had a cowboy plumber at my house !

    Interesting read though, only one person asked how much pressure the OP had at the Kitchen sink, answer was high, but most then still told the OP that the problem with low pressure upstairs was probably the stopcock and it needed changing?
  10. MikeJhn

    Best £750 Aquataps or £2000 Quooker Tap £1000 Verana Tap What's Best?

    Have I got this right, for the Quooker tap to do all it's supposed too it needs a boiler, CO2 cylinder and a refrigeration unit installed and obviously a power supply all in the cabinet under the sink?
  11. MikeJhn

    Low pressure mixer spray tap recommendations ?

    Most mixer spray taps are designed for mains pressure hot feed, you may find a pressure/flow booster is required for the tap of choice, look for one with slip joints to enable easy fitting without taking your hot water system apart.
  12. MikeJhn

    Atkinson tank top oil feed

    Tank if forty years old so think it's out of warranty by now, but thanks for your concern. 🤔 Just in case, it is not porous and has not UV degraded. 😇
  13. MikeJhn

    Atkinson tank top oil feed

    Only on steel and possibly modern twin wall tanks, on single skin plastic tanks you have to drill your own 30mm hole and screw the outlet down onto the gasket supplied. See here, think I have posted this before: Fitting The Atkinson Tanktop -...
  14. MikeJhn

    Atkinson tank top oil feed

    Are the floats prone to getting caught on the sides of oil tanks? specifically those without internal struts and round, what would be the best place to instal one in a round tank, central is not an option due to the lid, one side near the external brace is my preference due to the availability...
  15. MikeJhn

    Water appearing in washing machine when run kitchen taps

    I would be more worried about what looks like an electrical cable running across the bottom of the cabinet.
  16. MikeJhn

    Cold Water Tank In Loft - Cause Of Flood Dispute?

    No to put too fine a point on this, but would you like to be called a "Slum tenant" shows a mind set.
  17. MikeJhn

    New build flood

    With everything turned off, check to see it your water meter is turning, if not check outside for puddling in grass areas, is this new build on a flood plain? Ask the builder for his insurance details, that should prompt then into action, tell them if the issue is not resolved within (say seven...
  18. MikeJhn

    Atkinson tank top oil feed

    Sustained cold above ground will eventually migrate through the exposed pipe/oil to the underground pipe/oil, insulation above ground may prevent this or delay this happening.
  19. MikeJhn

    Atkinson tank top oil feed

    I got this from Atkinson's, they are having problems posting themselves: Hi all, we spotted threads on this forum, tried to reply but the system took the long post as spam so thought I would register to answer any queries. Top off take systems are a bit more complex than standard gravity feed...
  20. MikeJhn

    Atkinson tank top oil feed

    That can't have anything to do with the Atkinson tank top feed, but lack of insulation to the pipe?

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Sponsors

Electric Underfloor Heating The Wetroom Store Heating 2 Go Electrical Goods - Electrical Tools - Brand Names Green Electrical Goods
Back
Top