Have a boiler playing up at the minute with ignition problems everything pointed to the gas valve monometer on the outlet proved it was not opening, the gas valve was replaced still nothing but have gas and a spark, checked the flue for restrictions, electrodes and rectifacation, heat exchanger...
Hi all, any advice would be greatly appreciated.
Customer has an Alpha he25, boiler fires and after about 2 minutes it starts whistling/humming and the noise increases, it happens when calling for heating or hot water, when the boiler shuts down it also judders for a second or 2, they sent me a...
Hi all. I just want confirmation on my diagnosis of a cb24 fault. Basically pump runs but fan doesn't and no 240v at fan terminals on fan or pcb. So it's a PCB fault? Lights flashing simultaneously which is a flue fault. Alpha technical not answering, only taking messages.
Thanks
Hi
Cust has a new alpha 2 pump recently fitted. Seems to be set on speed 1. I cant seem to alter the speed.
Not fitted by me.
Buttons on front dont do anything.
Any ideas? Faulty pump??
Hi all
Recently moved into an ex council property, 2 bed flat. The pipework is all visible externally on the walls and quite old from the looks of it.
There is a Alpha Eco2 combi boiler installed.
When I first moved in the system was ridiculously noisy, clear sound of rushing water when the...
Hi all, I have an Alpha Boiler - Intec 34C with gas saver and thermal store.
I’ve developed an intermittent problem with the DHW, on central heating the boiler ignited fine, however when the DHW is run (opening a tap) the boiler fires, cuts out, fires cuts out etc. Ending up with the E01 code...
evening guys n gals,
Never ever fitted an alpha of any sort. Is this boiler any good? My mates only got a budget of £700 for a boiler flue and clock. I providing pipe n fittings.
Thanks
Hello,
I've a new fan and despite this and no blocked flue and everything else working to plan my boiler is not igniting. It is trying to but just won't "connect." Any help gratefully received as I'm bloody freezing!
Ta!
Catherine
Hey guys long time no type , I've been busy busy this last while and I've a wee issue if anyone can help,,,, I was called out to a boiler breakdown no heating or hw, now after a bit of diagnosing I've found that basically the APS isn't proving, now I've done all my checks that when it does...
Off to the factory Tuesday for a look around and pull a few boilers to pieces recently fitted 3 Eco 2 combis so may as well find out a bit more about them , all free of charge and they put you up over night 6 local plumbers going so should be a bit of banter will keep you posted how it goes ...
Hi guys there does not seem to be much talk about alpha boilers on the forum good or bad i service a few and am in the process of fitting a couple intec 2c s in 2 flats they seem ok alot worse out there i am off to the factory in may to have a look around and maybe pick up some info would be...
ive just moved into a house with this boiler. When I turn the hot water tap on it heats up under 10 seconds to scalding hot. I've turned the hot water dial right down on the boiler but it makes no difference.
The plumber said its because the hot water tank it has on the side is constantly hot...
Got an alpha CB50 which has suddenly stopped working. Both hot water and central heating only come on for a few seconds before cutting out only to restart trying again a minute later for the same result.
Did have issue that builders removed flue but that is back in place so shouldn't be an...
Hi all,
Got an Alpha 280P with hot water tap open the boiler firing but water only running luke warm, but when heating on and hot tap open water running nice and hot. I'm assuming diverter valve knackered? But not sure why?? Any advice would be much appreciated :-)
My first post:
Two unrelated problems. I have a 7 year old Alpha 35C boiler as part of a Flow Smart installation with a 50 litre Thermal Store on the primary circuit thats heats up the inflowing cold main before it entering the boiler via a mixer valve. The Thermal Store tank is sited in the...
Anybyou guys come across a alpha intec2 25x with e90 fault. It was running ok when I was there and didn't see it fault, but customer says she has to keep pressing reset and it keeps saying E90.
Hi, does anybody know if the standard Wilo pump head will fit on this model as i have an aging relative with a seized one, the cheapest price ive had is £190 +vat from the local merchant just for the genuine Alpha one..........
cheers
I have just had a new heat only boiler installed. I believe it is a 2 pipe system with 3 port valve for ch and dhw.
The installer couldn't really tell me what setting the pump should be on. I have had it on III since the install but the manual I downloaded suggests pf2.
Can anyone help with...
Just got the following from letting agent, I replaced Fan beginning of December, attending today any advice please
Following a boiler repair and service a month or so ago i have been having issues with my boiler . When I switch my boiler to turn the heating on the boiler occasionally...