Hello All,
First post here, I confess to being wet behind the ears with Baxi 105e major problem so its Urgent!
It started with Flame Failure Error > Gas Engineer got it working (No Parts Needed) but it went out again 2 hours later, On his 2nd visit he said that the problem must be with the...
Hello all,
My boiler is a fairly new installation (just under a year) and the pressure constantly drops at night after the central heating has been on. I only just re-pressurised the boiler last night to 1.4 bars and the boiler lost all of the pressure after being on for only a few hours...
Hello folks, just fired up the boiler for the winter and booked in a service and i'm having an odd issue, the hot water heats up fine, scalding hot but the boiler refuses to fire up the central heating. I have one of these old back boilers behind a fireplace which has a separate control panel in...
I am trying to troubleshoot a Baxi Luna 3 Combi boiler 8 years old, that is not making any hot water. It is in a customers second home, and receives little usage.
Over 2 days, hot water was getting less hot, until now none at all. When I call for heat, and the unit fires fine. There are no...
i have relocated the pipes from the old boiler and remove the hot water and heating expansion pipes i have used the hot tank pipes to fix a small rad in the old airing room removed the pump and connected the flow and return from the boiler 5 out of eight rads d/stairs work the rest nothing this...
I have an 18 year old Baxi 105e which is becoming more and more unreliable therefore I've decided it's time for a change. The house is a well insulated modern bungalow. I'm considering changing to a Ideal Logic boiler. All the pipes to the boiler come from above due to the construction of the...
Evening,
new install of a baxi 830. 6 weeks old
have one rad and two towel rails also wet UFH.
was all working great got a Heatmiser controlling the UFH and a Drayton basic wall stat the rads, both systems have separate motorised valves.
as I had hive previously to the house refurb I bought...
Hello, hopefully posting this in the right place. Have a Baxi duo-tec boiler that is not firing up for water or heating. The green 'hot water' led lights, showing that there is demand for hot water when the hot tap is turned on, but boiler does not even attempt to fire up. Heating initially...
Baxi heat only boiler (7 yrs old) - switches off after a few minutes with some banging noises followed by
a red flashing light on boiler
Reset the boiler manually after 5 mins and it runs fine all day
Next day when i switch on the boiler on it does the same thing
ive opened the screw on the pump...
Hi, we have a Baxi Solo 15 HE condensing boiler - The wall timer for the Central Heating and Hot Water is set to OFF not via the timed on off system, yet the boiler seems to switch on approximately every 10 Mins and runs for between 30 seconds and a minute.
When I say switch on, I can hear the...
Our boiler went off with error 133. I investigated and found the ignitor module had melted! This was replaced. When the boiler fires up now there is intense and immediate heat radiation from the left upper and lower front side of the heat exchanger unit. I switched off immediately and have a...
Hi
I have just bought the kit to replace the CH diaphragm as the pin is not going all the way back. When I look to get in to do it there is no space to get spanner’s, screwdrivers in etc. It is all blocked by the DHW diverter, pipes and wires.
Any advise on how best to get access?
many thanks
Paul
Hi all
My 4yr old baxi boiler turns on and once it's reached the thermostat temperature it starts to turn on and off every 5 secs. The pilot light turns off and then you hear it fire up, turn off, fire up, turn off. This continues until I turn it off and let it cool down. It has a separate...
Hi. Bored and wondering about a friend's boiler that was fitted a few years ago and that, having been involved with the heating system, I take an interest in. One of these jewels...
I am working on a baxi duo-tec 40 boiler there is no heating and hot water running fine. I've checked diverter valve and both motor and pin are operational.
This boiler is just over 4 yr old only serviced once before though. Next i want to check temperature sensor for central heating as they...
Hi there
I have a Baxi Bermuda C5 fire with back boiler and want to replace the gas fire only with a more modern one but leave the back boiler in place, what are my options please?
Regards
Hi
Looking to replace the Baxi 105E microswitch but Worried about getting the white connectors off without damaging the wiring.
has anyone done it and if so is there a trick to getting the connectors off?
Hi, have changed the DHW diaphragm as wasn’t getting hot water to shower, the old one did have a tear. Now getting error 60 light every 5 or 6 times the boiler fires up. Could this have anything to do with the change I made?
many help much appreciated 😀