I have a Very old commercial kitchen in my School, it dates originally from the 1950’s, it has had modernisation, but many of the Plumbing Fittings are original or contemporary with the period.
I need to replace the Washer in a Hot Sink Tap, just getting it apart required an impact wrench due...
Hi everyone,
After a bit of advice in the fact I’ve recently passed my domestic gas qualification however all the work I will carry out will be in commercial dwellings, I understand that I can only work on systems within 0.035m3 of gas. But do this apply from meter or closest valve to the...
Boiler is SIRIUS THREE FS 70 Potterton commercial.
Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
I run a small plumbing and heating company. I am looking for a commercial gas engineer to help out with a few call outs, servicing, safety checks etc. Most work around London, Kent, Surrey, Sussex area.
Ideally looking for someone self employed or another small business who could work...
We are looking for Commercial Gas Engineers to join a Major company on various projects around South of England primarily working on Gas Service / Mains replacement activities. Excellent Salary and Benefits, permanent position. Relocation payment can be discussed. Please get in touch if...
Hi all,
Hope all are well.
I’m in the early stages of renovating an industrial unit. The fit out is to have 7/8 commercial kitchens, these kitchens will have reasonable output, i.e. high street takeaway in terms of their demand.
The unit has 3 bar of pressure and 25 litres a minute of water...
Hi chaps I have a as new Ali plug cock key this is a big piece of kit for larger commercial fed type premises pictures available and price if your interested?? Regards kop
Hi
We are a commercial premises
Have been using the same plumber for years and very happy with his work but recently came to light he has a domestic ticket.
When questioned he said it was ok as all the boilers he works on are under 70kw?
He also says he does not touch the commercial catering...
Hi all.
I just wondered whether any of you are currently doing any site work on a price?
Only on the plumbing side no gas. Things like cylinder installs, 1st fixing and 2nd fixing.
I know this will vary across the country, I’m based in the midlands.
Any advice would be helpful.
Cheers
I am looking for suggestions /advice on getting a commercial high pressure toilets that does the job in one flush. Does anyone have any toilets they can recommend?
Does anyone in here have their commercial catering tickets? I have a job in London to connect and re-commission a couple of appliances in a commercial kitchen but I dont hold the relevant qualifications so looking for someone to help out.
Let me know if you are interested.
Anyone on here with their commercial gas tickets mind advising me on pricing. I have the qualifications but rarely do commercial work. How much do you normally charge for test and purging?
Also if anyone with these tickets is on here and based in Surrey/Kent I may need a hand with a job I am...
I am having to work on a concealed shower but there is no service valve and so I am having to isolate from a large mixing valve which is linked to several other showers. I am going to add a service valve to make it easier for future maintenance but the pipe connected to the shower is 15mm...
Can a domestic gas engineer write out a cp12 on a domestic boiler in a commercial premises. Feed by a secondary meter. Obviously anything on the primary meter is out of scope. Primary and secondary meters are located in the same area. Thanks
I have been asked to fit an external tap at a mental health facility to enable the external paths to be hosed down. What form of back syphoning measure is sufficient for this installation?
I am looking at instructing a commercial gas safe registered and plumber to start works in moving an existing plant room and also expand it.
Requirements:
Moving two ACV direct hot water tanks , adding one more
Installing 6 accumulators - piping a header
Tank
Preparing and install riser for...