Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

fault

  1. P

    Vokera sabre he29 hot water fault

    hello! Tried to post this in the gas safe part but it wouldn’t let me for some reason. I’m gas safe registered Has anyone worked on these Vokera sabre 29he combi boilers? I have one that when you run the hot tap it clicks loudly at pcb area and goes cold then hot . Initial thoughts are a...
  2. L

    Ideal logic 24 + heats radiators once then stops shows no fault !

    Hi all Looking for some help please! It concerns an ideal logic plus 24 combi. When you switch the central heating on it fires up fine. All the radiators get up to temperature. It then stops and the radiators cool down. All good! They do not come back on, even when the room is noticeably...
  3. Lambed84

    Baxi DuoTec fault codes

    Anyone know what the fault code e166 relates to on the above boiler? Thanx in advance gents
  4. S

    Central Heating Fault, Motorised Valve?

    Bit of an issue with my central heating this past few days, it's struggling to come on and was wondering if someone here could give me an idea of what's wrong. When I turn up the temperature to trigger the heating, it often seems to fail. It's hard to say how often, because it can work fine for...
  5. J

    Ideal ISAR HE 24 Fault.

    hi all i am new to the forum, Im an industrial sparky by trade working in steel works. My sister rents out an apartment the tenant has wrecked it along with the boiler I had the same boiler in my house and had nothing but trouble with so I learnt quiet a bit on them, but of course she doesn't...
  6. J

    Glow worm 30ci F9 fault

    Burnt my head out this one! Internal filling loop, Soding out when try to fill. Fitted new one, couldn't get pressure above 0 bar f9 starts flashing. Checked on low water pressure sensor with multi, was saying that I've got 2.5 bar of pressure in system when check white and orange wires I...
  7. Leo21

    Eco Tec pro 24 f62 fault code

    ive for an f62 as an occasional fault. Anyone know the correct resistance on the gas valve?
  8. M

    Ideal Logic+ 30 Combi Fault

    Basically, the boiler this morning wouldn't fire up so went to check it and was the pressure was 0, so topped it up normally to about 1.5 which has worked before, but it is still giving the fault: 1) top pressure up to 1.0, 2) bleed radiators, 3) call installers I've had a local plumber out...
  9. J

    Glow worm ultracom 30cxi Combi boiler Fault.

    Hi guys. Wondered if anyone could shed some light on this. I have an ongoing problem with my ultracom 30cxi that was fitted about 7 years ago. (Wish I’d bought a worcester). I lose water pressure when the hot taps run. The boiler dumps the lot through the pressure relief valve. The...
  10. S

    Ideal Logic + heat 24 fault code FA

    Ideal Logic + heat 24 fault code FA I understand it’s a Flow direction fault. Meaning the incoming water is hotter than the outgoing, but the boiler has been installed for more than 7 years and its only just started happening… Could this be a faulty pump or thermostat? Any advice would be...
  11. king of pipes

    Ideal icos heat only 24he power fault

    Went to this boiler monday for a FL fault the condense pipe was blocked cleared that stripped it down a did a full service all ok, thursday pm phone call boiler has no power , went to have a look internal fuse ok, power in to control box and up to pcb but thats it no lights on control box anyone...
  12. M

    How to track this fault down

    Like a lot of people here, I have a combi boiler (Glowworm 30SXi) that's losing pressure over the period of a few hours. Once the pressure is gone, the heating stops and I have to charge it up again. I had a couple of plumbers in to replace the wifi thermostats and while they were here they...
  13. Gasmk1

    worcester 38cdi come giving EA fault

    called this morning had aquick look change electrodes as ionisation probe was quite burnt away, but went off again later calling back anything i should look for thats obvious ( customer has not had it serviced regulatrly so the warranty is void even though it had 6 years)
  14. A

    Halstead Eden 18 CBC flame fault

    Evening All Looking for a couple of suggestions to a problem with my boiler. An intermittent fault developed about 2 months ago where the 'Flame Failure' error shut the boiler down every couple of weeks. A quick hop in to the loft to reset fixed it every time except now. The boiler isn't...
  15. L

    Viessmann Boiler FF Fault

    Evening, wondering if any of you boiler engineers have any ideas. I had to move a bathroom radiator and couldn't do it without draining the system down. I turned the boiler off and then drained the central heating from a drain off. I completed pipework alterations, topped the water back up...
  16. M

    Ariston Microgenus 24mffii A01 fault. PCB?

    Hi guys. I've got an Ariston Microgenus mffi 24 non condensing that keeps displaying the A01 fault. Press 're set and it resets fine, fires up ok but the ignition keeps clicking, then after a while it will knock off again. It's like the boiler isn't detecting a flame as in the ignition sequence...
  17. M

    Fault finding on oil burners

    Hey people. Was wondering if anyone has any tips or tricks on fault finding on oil burners. I hate turning up to break downs and not having enough confidence when diagnosing the burners. I know there's a process to the firing of the burner but I struggle to figure out what I'm looking for...
  18. Z

    Ideal logic combi + fault display

    How do you bring the fault codes up on these? Going to look at a friends later they need to reset it everyday. Will probably be L2 or L1 as it mostly is on the logics. They are saying they can't see a fault code on the display when it needs to be reset. I could with knowing the code so I can go...
  19. A

    24 RI CH comes on when water on. Possible programmer fault also

    Hi everyone Been a while, hope everyone is well. Been to a job tonight, if hw on rads get hot also. Ch 2 port seized open. Lever on valve permanently slack. 24 RI Another issue seems to be programmer might be working intermittently. Even with ch and hw turned off at programmer, boiler fired...
  20. M

    Ferolli Optima 701 Fault

    Needing some advice regarding a ferolli optima 701 I'm a gas safe engineer, but I've never had this issue and I wanna see if anybody else has possibly had it before I change the board on Monday. So the boiler broke down yesterday, permanent pilot stayed lit, all boiler electrics failed however...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top