Hello,
I had a gas engineer visit to disconnect a gas fire. However, he was stumped by the gas meter's regulator. He claimed to have never seen a setup like it. The engineer did not feel confident in disconnecting the gas supply to perform the job, so we didn't go ahead.
The engineer phoned...
https://www.bes.co.uk/gasm8-hob-pro-gas-hob-connector-1-2-bsp-tf-x-10-mm-500mm-24916/?ref=gs&rnd=19366&gad_source=1
Cheap as chips too.
Would you use it?
I'm moving to a flat currently fitted with an induction hob, but I really can't live without a wok burner. The best wok burner approved for domestic indoor use is a German propane-fed portable burner. I'm told the manufacturer can re-jet it for methane - but is there a compliant way to get a...
Good morning everybody.
My name is Abdalrhman I live in Wigan, recently I have started a Gas safe course, and Iam studying very hard to become a Gas safe engineer, but I need to do some shadwing to understand more about this field, I have a very good experience in plumbing ..
Please If that...
Hi All,
Combo Gas Boiler - Immergas Zeus Mini
I’m hoping you can maybe help me with an intermittent issue I’m having with my Immergas Zeus Mini Combi Boiler.
It works for weeks and then has a sporadic issue with igniting the boiler? I’ve uploaded a video so maybe you can take a Quick Look to...
Hi all,
First time post so please be gentle.
Trying to ascertain if damp wall in our kitchen is being causes by rising damp or by a seeping pipe.
The pipe in the image attached disappears off under our solid kitchen floor (back addition of a 1890's Victorian terrace). The other end disappears...
I have a ferolli HE31C and it has developed a water leak that appears to be from a porous casing in the gas valve. I can not see where water even enters the gas valve as I presume the gas goes in the bottom and out of the top of the valve. To check this out I dried it off and put some sealant...
Hi everyone,
I've recently moved into a new property and had a lot of interference on our TV and Audio equipment, following advice I had our earth changed from PME to 8ft rod and it improved a lot but is still not perfect (the theory is the big factory located near our property is putting...
Hi everyone,
After a bit of advice in the fact I’ve recently passed my domestic gas qualification however all the work I will carry out will be in commercial dwellings, I understand that I can only work on systems within 0.035m3 of gas. But do this apply from meter or closest valve to the...
Hi, I’m having a gas cooker pipe capped off. The GS registered plumber/ fitter, has told me that to do this, he’ll also have to service the combi boiler and check the radiators. (combi boiler was serviced in January by the original installer) Before retiring I was a joiner and honestly in the...
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
I am on my firms gas safe registration. If someone asks me to cap a gas pipe off going to a fire. Would I need to have my own gas safe registration for this?
Good afternoon,
I am after a replacement British Gas TRV head. I have found a direct replacement on Ebay, however they are £39.99 + £3.99 postage.
Does anyone know if there is a different TRV head that will work?
Kind regards,
Laurence
Just a quick question on common ducts for gas laundry appliances. I have recently looked at a gas ironer which shared a common duct with 2 electric dryers. I believe this isn't allowed but the manufacturer sais it's up to a risk assessment. Any ideas anyone.
Hi everyone, I’m just DIYing a bathroom refurb and came across this blanked off pipe in the wall that protrudes out about 2cm. The previous owners tiled round it and left it exposed which makes me think that it was left in situ on purpose. We don’t actually use gas in the house and don’t have a...