Hi guys,
any reason why the front casing on a glowworm ultimate Would get too hot?
i serviced this boiler a found everything to be ok but one it was back together and heating up, the front case feels a little too hot for my liking. It's not 'ouch yer f*ucker' but it defo hot
by the way...
has anyone got a manual for the above glowworm 35 ci the one on the my boiler .com does not work it just errors.been to it today its intermittently not working - its sparking but no gas to burner there is 6 wires to gas valve stepper motor anyone any ideas what voltages are on these and is the...
Free boiler training in Bristol
Dear
One of the great benefits of being a member of Club Energy is that you can benefit from free training, as well as a 25% discount on any BPEC training being held.
Our Bristol Training Centre of Excellence has the following free course happening next...
Can any one here that's actually done any work on the Glowworm ECO scheme get in touch with me.
And does anyone one know who the local rep for the Manchester area is?
I may have posted this in the wrong thread a moment ago:Hi, the condensate pump on my Flexicom 30cx has packed in (I'm pretty sure it is that as the reservoir fills within a day or so and if I empty it, it all works ok again for a day).Can I get a suitable pump that is not supplied by Glow-worm...
Hi, the condensate pump on my Flexicom 30cx has packed in (I'm pretty sure it is that as the reservoir fills within a day or so and if I empty it,it all works ok again for a day).Can I get a suitable pump that is not supplied by Glowworm (very expensive) and fit it myself?Money is tight just at...
has anybody else had trouble with the PRVs when installing the current Betacom
the pipework screws up into a plastic fitting, metal to plastic is never a good idea but in this case the plastic seems to be particularly soft and easy to thread
a coleague had problems a months ago and i had the...
Hello everyone, I have been asked to repair a Glowworm micron 50ff boiler. The boilers reset light is illuminated and the burner indicator light is flashing on the fault finding chart this indcates softwaree problem. The boiler is othwise not working. I suspect the PCB is us. This happened after...
Hi All
We have discovered a couple of boilers with problems that can't be sold as new, but may be of interest to a bargain hunter who doesn't mind putting a bit of effort in.
The Glowworm Flexicom 18 SX system boiler has been hung on a wall, but not used. The template is torn and scruffy, the...
Hi all,
Hopefully someone will be able to point me in the right direction>
I have a boiler fitted to a koi pond via a heat exchanger and i cant get it to fire. Ive followed the fault finder suggestions but it still won't work. The problem is when its turned on the pump starts, the fan starts...
I have a customer with a Glow-worm 80FF which has a very strange problem, and I was wondering if there was anyone out there with any experiece/idea of what's going on. When the boiler is on, there is no problem. But when it goes off, ie up to temperature or in an "off" mode, the pump over-run...
Hello,
Ive got a glowworm cxi combi and its losing pressure recently.Checked for any leaks in pipework.The fault light isnt coming on but sound like something is constanly running and fire up for central heating demand.
I pressured it to just over 1.0 bar before and it ran for afew minuites...
went to this today its one i look after complaint was noisy. put into full rate and all was ok co2 9% flue etc good put into low rate and it nearly burst my eardrums and threw the analyser into new cell teritory nearly - glow worm said low rate offset must be out decress until the noise stops -...
serviced this a few days ago and the thermocouple fell apart when i brushed it so fitted new what a pig in unaccessible place - just got called back to it the overheat stat has failed i must have knocked the wires when fitting the thermocouple - they were brittle and when removing the cover...
fitted a few of these as the landlord gets them cheap dont know if anyone else has come accross this phoned glowworm and they dont know.
if the boiler rises to 2.5 bar it iluminates the flame lockout light and the boiler goes into pump over run untill the pressure drops eg if boiler cools...
hey guys,
moved into new property couple weeks back and woohay the boiler has packed in!:willy_nilly:
seems to be the fan and got a quote to replace for £230 including fitting.
Does this seem a reasonable price??
boiler is a glowworm ultimate (quite old).
cheers!
Hi new to this but have looked for similar everywhere and no joy! I have a glowworm betacom 30 5 years old. All hot water taps are ok apart from shower mixer, no hot water but when I run the hot tap a bit as well, the shower goes hot. I have replaced the mixer so won't be that and have checked...
Has anyone any experience of these. It's an OF boiler, I was after the manual if anyone has a copy? Long shot I know. I rang glowworm earlier for one and their reply was "oh gosh"!
More to the point I've AR'd the boiler due to the flue, the current set up is, it comes off the boiler in rigid...