My firebird oil boiler hw supply is luke warm, but does heat up slightly when run if the ch is on at the same time.
Is this a faulty diverter valve?
If so could I replace this myself as I've heard they're expensive to fix.
Tia
Hi. I’m having a loft conversion done in the Uk. My builder has made the connection for the hot water to the loft but since he has done this my hot water in the rest of the house is not getting hot. I have a combination boiler and the water gets to say 37 degrees ish but not hot hot for washing...
Hi All! I hope you can give me some advise.
I had combi boiler (Viessman vitodens 100-w 30kW) installed about half year ago. Recently I start hearing one single bang when hot water is opened at any of taps around house. It sound like someone in other room will knock a radiator (not relly loud...
Hi today, I installed a new kitchen tap, isolated the stopcock I’m drained down the hot water when turn the stopcock back on the pressure outside the kitchen tap was weaker. Strangely, the bathroom tap has good pressure this is for the hot both colds a good pressure
Any advice please?
When the hot water is set to on, the radiators also warm up.
Two 2-port valve / cylinder/gas boiler system.
Seemed possible likely that the valve to the heating was sticking open (partially?). This valve was replaced the problem remains.
What could be other possible causes?
When the heating...
Hi,
Just had a new bathroom fitted and have a pathetic flow of hot water from the sink tap. It wasn't great before. I can't get hold of a plumber, but any ideas as to what this might be? I also noticed that the pipes that feed the hot tap go into the loft? I know nothing about plumbing, but is...
Customer complained of hot water tank getting hot when no demand
Y plan system couldn't see any issues so I watched it
Timer set to CH only, HW off
Thermostat turned to on
Heating comes on as normal, valve moved to CH position
After around 20 minutes the 3 way valve moves to mid point and...
We’ve noticed a wet dog type of smell on items that have been in contact with hot water from our taps. This doesn’t happen with cold water from our taps.
Do you have any ideas what this could be and how the issue can be resolved please?
Hi All, I have a leaking drain valve off the CW inlet on a Range Cylinder. Am I right in thinking I have to empty the Cylinder below the CW inlet to change the valve? To isolate cold water to the tank to prevent refill, should I just lock off the 1 stop CW inlet or all 3 red stops?
Turn mains...
Hi, I am reinstating an indirect hot water tank and have 2 cold water feeds coming into it from the same supply. One of the feeds has a float valve but what ever was on the other has been removed. Why would there be 2 feeds to the top of the tank? Can I blank one off and just use the float valve...
Hot water temperature is low. This varies at different flow rates.
At 8lpm it is around 37deg (c)
At 2lpm it is around 49deg (c)
8lpm is around the max flow rate. It is around the same flow rate / temperature at all taps (upstairs bath / upstairs sink / downstairs kitchen / downstairs...
Hi, I've got a cold water storage tank which feeds the hot water cylinder below. The hot water is backflowing up to the cold water tank and then overflowing now and again. If i put a non return valve on the cold feed to the cylinder would this just push the water up to the vent pipe? There are...
I've just moved into a house with an old Potterton Profile P60e (75% efficient). The hot water tank is currently taking up the space in the bathroom that would be perfect for a shower enclosure.
So we have a choice,
1) Upgrade the boiler to a combi, rip out the tank and replace with shower...
Looking for a quick bit of advice since I'm trying to wrap my head around what work I need done.
Right now I have an old conventional boiler that heats my hot water tank. The water tank has manual open/shut valve so that I can only heat the water tank and not the heating. I'm replacing this...
Please forgive the length of this post, but I must provide all the information to fully explain the issue. I am completely perplexed! My 43 year oldhome is in the country, on a well. Recently, I had a 20+ year old 40 gallon propane hot water heater professionally replaced. The house service line...
I fitting a new Mira shower in a slightly different position in the bathroom. It’s going to be easier to feed it with cold water from main cold cylinder feed and from a connection to the hot water cylinder expansion pipe. These are just above the shower position.
the pipes are both 22mm and I...
I have a new shower that has worked fine, albeit with low hot water pressure, for a couple of months. Now it starts hot, but then goes cold completely, sometimes after a couple of minutes, sometimes after less than 30 seconds.
Meanwhile, on the side of the bathroom sink, there are no issues...
Good morning everyone. My parent had a new kitchen and bathroom fitted in her flat 2 years ago and has only now told me that the hot water flow to both hot taps is really poor. it wasn't like this before. its a flat with a 1075x450 IND BS combi HW tank. she says that the tank was drained down...