Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

ideal

Recent contents View information Top users
  1. M

    Ideal Default DHW Temperature

    Hi everyone, I have an Ideal Max Heat H18 system boiler with weather compensation installed. My understanding is that while weather compensation controls the heating flow temperature based on the outdoor temperature and the setpoint at the boiler, when there’s a call for hot water, the boiler...
  2. C

    UK Ideal Classic FF230 condemed?

    Hiya, I have an Ideal Classic FF230 in my house with the sealed system kit and I’ve been having pressure issues with it the past few weeks where it comes on, the pressure steadily rises to 3 bar and then vents via the PRV and then when it cools down the pressure is zero. I’ve had British Gas...
  3. T

    Ideal logic C35+ with Halo Lite RF ( not wi-fi)

    Trying to find an answer to my question regarding "load compensation" Once Halo target temp of 20*c is reached , + another 5* (20'5*c) and the red flame in the display and green "demand" light on the reciever go out, the boiler still kicks in and out every 5- 15 mins until end of program. From...
    • trickytrev
    • Thread
    • ideal ideal logic logic
    • Replies: 0
    • Forum: UK Plumbers Forums
  4. Audiotechnical

    Looking for a cradle (Ideal Standard)!!

    Hi All, I'm desperately looking for a cradle (the assembly that connects the flush unit to the cistern, in case I'm using the wrong terminology) for a discontinued Ideal Standard 2 button pneumatic system (Part number: SV93467). I really can't find it anywhere. Can anyone recommend where I...
  5. damobolton

    Ideal Standard Dual Flush Cistern Overflow Problem

    Any help greatly appreciated. It appears that every time i flush the toilet the cistern fills up then overflows back in to the toilet. This can last for 2 minutes or is continually running. I have replaced the cistern dual valve as it was very loose and parts had broken off it and it wasn't a...
  6. T

    Air inside ideal Logic 24 boiler system

    Hi All, Anyone know the best way to get air out of an ideal Logic 24 boiler please, I have bled all of the radiators successfully starting at the bottom of the property, and also utilised the two bleed valves at the highest point above the boiler (photo attached) but there is still air bubbling...
    • Turbotim
    • Thread
    • boiler ideal ideal logic logic system
    • Replies: 6
    • Forum: Boiler Advice Forum
  7. F

    No Hot water, Fixed and Broken Again Ideal Logic 24

    Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
  8. ian.

    Auto balance trv and Ideal Vogue boiler

    I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
  9. B

    Ideal logic products of combustion in casing

    Has anyone else come across this situation? I keep detecting products of combustion inside the casing of Ideal Logic boilers. I've replaced every seal I can find, namely flue seals, turret seals, sump connection seals, burner seal, electrode seal, flame detection seal, etc, and yet still I pick...
  10. T

    IDEAL CONCORD FLOOR STANDING BOILER

    Wanted old Ideal Standard Concorde Boiler for spare parts. If you are removing one please let me know. Thanks
  11. drippy

    Trevi/Ideal Standard Bath & Shower Mixer A7000AA/A7100AA

    Please help me obtain a copy of the user manual for this bath and shower mixer, pictured below. I am particularly concerned about how to re-regulate the bath filler so it fills the bath to the desired level. Many thanks!
  12. W

    Ideal standard push Btn flush valve

    Hi all, I am trying to find an alternative flush valve to fit the cradle of a ideal standard push btn flush. It is all tiled in and changing to a Siamp or fluidmaster is not an option anyone have any ideas Thanks
  13. S

    Fd fault on Ideal Heat 15

    Got fd code on Ideal Logic Heat 15. Had two plumbers out and no joy. It’s had a new water flow sensor, flush with sentinel x800 and refurbished grundfos water pump. Boiler tries to light and water pump power light comes on but goes off immediately and boiler flashes fd again. It’s heat only so I...
  14. A

    Ideal boilers

    Anyone shed any light on ideal boilers catching fire , something about air pockets in the heat ex ? ,in a fault condition , thanks ray .
  15. F

    Ideal, iMini, Independent, Keston and Logic Product recall

    https://idealheating.com/blog/important-customer-safety-notice Not very good from Ideal
  16. B

    Mess left by Ideal Heating Gas Engineer

    I was sent an engineer by Ideal Heating to fix a problem with my system. When he left he drove over a pot of sealing compound (which must have dropped out of his van) on my shared drive. My neighbour pointed it out to me since he was parked in her space. I tried to remove it with water and...
  17. 8

    Ideal isar he24 leak at bottom

    Hello. New here. I dont know nothing about boilers or plumbing. Just wondering any idea of cost or what the issue is. 15y old boiler, never had any issues apart from heater exchange smal leak 2y ago, BG changed whole heater exchange and some other small leaks. 2y later, now slow leak at bottom...
  18. chloeradhsaw

    One Pipe System Ideal Mexico 2 Boiler

    Hello friends - I really struggle to understand my heating and hot water system I posted my question on Diynot but it ended up being five pages and couldnt get to the bottom of it and I thought worth asking the elders on here for their view - Hot water temp is 40 Degrees - Ideal Mexico 2...
  19. C

    Ideal 32 system efficiency level

    I’ve had an Ideal Vogue 32max/gen2 system boiler to a Megaflo fitted a week and running it at Flow temp 73 degrees to getting a return temp of about 55 degrees C, I’m seeing the LCD screen saying the efficiency level is only 25-28%. Has anyone else seen such a low percentage? I know for a fact...
  20. Gasmk1

    Ideal evomax loses its settings if power turned off

    Does the evomax lose its settings when power turned off

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top