Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

mixer

Recent contents View information Top users
  1. P

    Kitchen mixer tap dripping - How to replace the cartridge?

  2. E

    Mixer Tap Cartridge change advise.

    Hi Our kitchen mixer tap is leaking around the bottom. Unsure where the leak is coming from but suspect/hope a new cartridge will fix it. I am not a confident DIY guy, our mains pressure is really high and so plumbing makes me nervous 😂 but I feel like this is a job I should really be able to...
  3. B

    Mixer tap ring sheared during seal replacement - how remove

    In serious trouble here, was going to replace seals around base of mixer tap spout as it was stiff to rotate. Allen removed ok, but spout very difficult to remove, but working it back and forth got it out. But a part has sheared and is stuck in tap base. How on earth I am going to get this...
  4. S

    Low pressure mixer spray tap recommendations ?

    I'll be installing a new kitchen, DIY, and the Mrs wants a mixer tap with a switchable spray/regular flow. No pullout with hose but more like one with a spiral round the outer hose that lifts out of a mount and you can move it about a bit. Something like you see on catering sinks. Now stay with...
  5. B

    Shower mixer knob won’t reattach

    I bought this shower mixer unit from Victoria Plumb some years ago, & one of the handles has come off & I cannot manage to re-fit it to the mixer unit arm (see photos). It was in place for a long time but somehow came off recently but no matter how much pressure I apply to try to push it back...
  6. J

    Something wrong with the bathtub mixer tap

    Hi All, I hope you are doing well. I have this old-school bathtub mixer tub. I think there is something wrong with it. When I pour cold water then I have to wait for hot water twice or 3 times longer like cold water (higher pressure) forces itself into the hot water pipe otherwise how to...
  7. M

    Mixer mixer shower, compatible with tanked supply

    Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
  8. S

    Advice needed for a mixer Spray for kitchen ?

    Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
  9. P

    Viessmann combi starts when cold, mixer, tap is opened

    Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
  10. C

    Mixer bar fitting solutions?

    The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
  11. C

    Mira shower mixer adjustment.

    IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
  12. drippy

    Trevi/Ideal Standard Bath & Shower Mixer A7000AA/A7100AA

    Please help me obtain a copy of the user manual for this bath and shower mixer, pictured below. I am particularly concerned about how to re-regulate the bath filler so it fills the bath to the desired level. Many thanks!
  13. A

    How do I remove a rounded off screw from kitchen mixer tap?

    I need to replace the washer of my kitchen mixer tap as it is leaking. I was able to remove the spout once by unscrewing the screw on the back of the tap. However now I can't remove it again as it seems I must have used the wrong screw head and have rounded off the head. Please see attached...
  14. T

    Delaying the fill on a loft cold water tank - electric and mixer showers running at once

    Hello, and thanks for taking the time to read. I'm trying to work out if the idea I have is practical? The water pressure in my newly renovated house (4 bathrooms is tragic). Current set up is: A hot/cold mixer in the main ensuite which is ok as long as you don't run anything else. One electric...
  15. C

    Kitchen pull out mixer taps

    Hi Anyone know of a pull out kitchen tap that has decent pressure? I have had low pressure from this tap for a number of years and it's not helped with the two 10mm tails that must reduce even further. Hoping something is around that I can use 15mm full bore tails and isolating valves but all...
  16. L

    Mains supply to mixer tap is pushing cold water to hot water pipe

    I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is...
  17. F

    shower bar mixer not producing hot water

    hello all, happy new year! i hope i have posted this in the right section i have a shower bar mixer. the shower runs luke warm. a quick google search showed some ideas on how to adjust it. i tried adjusting it and it didn't change the temp. when i adjusted it the other way to test the cold...
  18. M

    New here!- Mixer Shower Issue!

    Hello! Im Martyn Im new here and have joined for some advice on a couple of things. Ive got an issue with a Mira mixer shower that has increasingly become harder to operate. The shower was installed before I moved into the house. Basically what happens is that I turn the shower on so there's...
  19. P

    Change shower mixer. Invented hot water cylinder

    I need to change my shower mixer and I have a unvented hot water cylinder. Is it sufficient to turn off the mains? Do I need to drain the cylinder? Thanks
  20. S

    Copper pipe 15mm burred shower mixer fitting

    Hi, hope all is well! I’ve fitted a compression cap on two of my shower mixer copper pipes (15mm). One of them has scratches and burring and is very slightly out of shape. It leaked but I added some PFTE tape over the olive and it seems to of done the job. However… I’m tiling the wall and...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top