Evening all.
I have open vented C/H system with a heat only boiler and 10 rads over 3 floors.
I have just replaced a rad on the middle floor. Drained system down for new gateway valve for cold feed for header tank. Refilled system no leaks, 👍, but the top top 2 rads won’t get hot.
ALL rads...
The radiators were taken off and the boiler was switched off as was the water supply.
Would switching the water supply back on cause a leak? The only taps are the bathroom and kitchen which have their own stop valves. The toilet has not been removed.
So the plasterer has removed all the Radiators from the walls.
The boiler Vaillant Eco Tec Plus 28 is showing a F22 fault - I assume this is due to the fact there is zero pressure in the CH as its been drained.
1) Do I just leave the boiler as is or switch it off ?- I do not need water as...
Hello. I have a Worcester Greenstar 24 Ri boiler linked to a Megaflo cylinder. The boiler heats water for central heating but when I want hot water only the boiler does not fire up. I can get hot water when the central heating is on, but not ideal in the summer. The boiler is only 18 months old...
Hi,
Up until a few weeks ago heating the water (we have a water tank) used to heat the radiators in the bathroom and the en suite. For some reason our water heater has started heating all the radiators in the upstairs of the house apart from the bathroom, en suite still heats up though! Any...
Can anybody let me know if they've experienced 2 radiators gettng warm upstairs (both above the boiler) when the boiler is only set to hot water. It's a four bed house and the other 4 rads upstairs don't get warm so I'm guessing not divertor valve related which is only a couple of years old. I...
Looking at redcorating our whole house so was wondering whether it's better for the CH system to do it one by one or remove them all at once and then put them back all at once?
Should radiators be removed for decorating room by room and then once the room has been decorated to replace it...
Hi.
I've an oil-fired condensing boiler (11 years old) in the garage which has two external pumps (Wilo RS50s). I decided to flush out the system and after emptying it via the lower ground floor radiator added Fernox F5 to the tank and turned the supply back on. Running the system leads to the...
Hi guys, I have fitted a new radiator and had a few issues working things out once I put it on the bracket. I screwed the tails in until the threads were no longer visible.
The tails were too far out of the rad/too long and couldn't align the valves with the pipes. So I twisted them in further...
Hi All.
First post.
What a great bunch of people here.
I have recently had an extension done and we have UFH on just the new extension, and radiators upstairs etc, in the house we have a nest thermostat and a heatmiser stat for the UFH area. The issue I am having right now is that the nest is...
Boiler: Valiant Ecotec 832
UHF (new): 2 zone mixing manifold, Heatmiser Neo Air thermostats x2, Heatmiser UH8 RF (wireless) wiring centre
Central Heating (existing): Netatmo radiator valves connected to Netatmo thermostat and boiler relay
Other (new): Two Honeywell motorised valves - 1 for CH...
Hello, I need some help please
I have an open vented central heating system with a Potterton Profile Boiler. Probably 25 years old
I was having trouble getting all of the radiators hot at the same time, by turning the upstairs off I could get most of the downstairs hot for a while and vice...
Hot water coming out of the hot water storage cylinder into upstairs radiators after heating/HW turns off and running out of hot water in the mornings.
I have a Glow Worm 24HX Condensing boiler on the ground floor with a pump in the same cupboard, a hot water storage cylinder in the airing...
Ive just moved into a rented property and some of the radiators were very cold at the top so I bled the radiators.
The boiler lost pressure and switched off.
I've repressurised the boiler to 1.5 but the controller on the boiler is completely off and I have no idea how to turn the thing back on...
Advice please. Building a home with suspended timber floor. 300mm Ijoists at ground level with sheeps wool insulation. Wondering whether to use copper or plastic pipes for radiators/hot water and where to locate them in the ground foor. Within the joists inbetween the insulation? OR Underfloor -...
I have a Charnwood Country 15B stove. I’m having a problem with the radiators not warming up enough.
There’s a thermostat on the outgoing pipe which is set to 85 degrees, and the thermostat on the incoming pipe is currently set to 40 degrees. The thermostat on the incoming pipe is what...
I have a central heating system that runs from a stove burning wood mostly and smokeless fuel overnight in Winter. I fitted the system about 25 years ago but the stove was changed about 10 years ago.
Problems started over year ago when the radiator in the extension, which is used as a store room...
Apologies if something like this already been covered.
We have new underfloor heating and new radiators upstairs.
Problem is the company who fitted the boiler didn't fit a valve to isolate the upstairs radiators, so I fear when we turn on the underfloor heating it will basically heat upstairs...