Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

unvented

  1. R

    Megaflo Eco System Unvented Cylinder Loud Bangs

    Hi Everyone, Hoping for some advise / assistance on an issue I have on my Megaflo Eco System Unvented Cylinder which is making a loud band. This occurs when the hot water heating is on and when the cylinder heats up to temperature, once at temperature the motorized valve closes and there a...
  2. G

    Pressure rising on an unvented system

    Hi all, The pressure bar in my unvented system is rising. It’s set at 1.5 and rises to 2/2.5. I know it will rise when the water is heating but this now doesn’t drop. I have an Oil boiler and at present only the hot water is on. I have reduced the pressure by bleeding a radiator. My question...
    • Glen Eley
    • Thread
    • pressure system unvented
    • Replies: 2
    • Forum: UK Plumbers Forums
  3. R

    Unvented cylinder viability??

    I'm looking at getting an unvented cylinder fitted but want to know if it's viable before even getting a quote. My cold incoming main is only 15mm but I do get a good pressure and flow which doesn't change alot when another tap or shower is used. Would an unvented be possible?
  4. C

    Unvented Center cylinder no hot water

    Hi all, I’ve got an issue with no hot water from Center 300L unvented Cylinder on S Plan plus system. All Electrical controls working fine. Only way to get hot water to the taps is by using immersion heater. Any ideas what could be up? Thanks in advance.
  5. B

    Nightmare boiler and unvented cylinder installation

    Hello and happy Easter everyone, hope you're having more fun than me! Friendly advice needed please. Long story short, we arranged to have a 2 day 2 engineer installation of system boiler and unvented cylinder, replacing a heat only boiler and unvented cylinder with broken coil. Got 3 quotes...
  6. J

    Suitability of Unvented Cylinder

    Hi I've read through dozens of threads on here about unvented systems but was wondering if someone might provide some advice on an upgrade we are planning as part of a bathroom refurb Current Setup: Gravity fed system with cold water tank in the loft and hot water tank in the hot press (1st...
  7. pufferfish91

    Unvented Cylinder Gushing Water from Relief Valve?

    Hi folks, I hope someone can help me. This morning we noticed water leaking under the hot water cylinder in hotpress room. On closer inspection, the water was just gushing on to the floor and it was only by chance we noticed it. We turned off the heating system and spent the morning emptying...
  8. O

    Unvented cylinder - usage question

    We have an unvented cylinder with a Horstmann Electronic 7 timer. The cylinder only serves a wet room which is very rarely used. The rest of the house is served by a Vaillant combi boiler. The timer on the cylinder is set to heat up water 3 times per 24 hours, which I think it is the default...
  9. R

    Advantage of unvented cylinder outweigh the disadvantages?

    I have come to my decision I might as well do my G3, even if only for maintenance jobs. Question I have is WHY we are fitting so many of these unvented cylinders i.e. 27 gallons /117l size or above (I'm not disputing the need for 10l unvented 'cylinders'). They 'need' annual servicing by a G3...
  10. R

    Do I need G3 to repair a 10l unvented cylinder?

    Hi. Potential customer has a leaking 10l Ariston Europrisma cylinder. Probably just a flange gasket or the magnesium anode needs replacing. While I feel this is easily the sort of task I can tackle as I am very good at mending things, I get the impression I'd need my G3 to install such a...
  11. M

    500L buffer Vs Unvented HW

    Having a chat with colleagues on this one to decide on best route. Existing 500L megaflo which does not provide sufficiant HW. Cold water entering cools the hot way too quickly and consequently the 500L is good for about half that. Coil is 54kw boiler is 80kw Cylinder options… The...
  12. S

    Insulate a Unvented Cylinder

    Hi I have a warmflow unvented water cylinder (indirect 250) in a hotpress. It was installed two years ago, but never had any lagging put around it. Wanted to ask if that would have been for a reason why it wouldn't have, and also would insulation be a good idea to warp around the tank? Thanks
  13. I

    Draining ACV unvented Cylinder

    Hi Guys, has anyone come across the ACV cylinders, my client has SLE-160 in the loft and there is no drain off boss.. The cold inlet is on the top next to the hot outlet. I need to replace the immersion element located at the bottom of the tank. MI is not helpful. Possibly looking at...
  14. B

    Advice needed with my Hive Multi-zone and unvented tank

    Hi, I'd appreciate a bit of advice about my hot water and heating system.. So, we moved into a new build about 5 months ago and we have a TheraQ ProLite SS 250 unvented tank, we also have a gas boiler and Hive multizone. My understanding is that the boiler sends hot water to the tank to heat up...
  15. S

    Can remove limescale from unvented direct cylinder (center store)

    I have an unvented direct cylinder from centerstore to use it only for hot water CenterStore direct unvented cylinder 120ltr | Wolseley - https://www.wolseley.co.uk/product/centerstore-direct-unvented-cylinder-120-ltr/ but with two immersion heaters. I had it the cylinder working fine for 4-5...
  16. R

    Normal unvented indirect tank or high gain unvented indirect tank

    Hi, Trying to decide which cylinder to go for? I am renovating my house which will end up having four bathrooms and a wc. I am planning to go for a 300l unvented indirect cylinder as currently I have a vented cylinder with a cold water tank in the loft and face issues with hot water pressure...
  17. H

    How do I operate Santon Unvented Hot Water System, model PP170E?

    How do I operate Santon Premier Plus Unvented Hot Water System, model PP170E? I recently moved into this rented, all electric, 2 bedroom flat. I am spending more than £10 per day at the moment, which is simply unaffordable. There are two switches - cables connected to the a thermostat housing...
  18. J

    advice on timer control for Unvented Cylinder

    Would need some advice if I could replace Newlec Economy to OP Ecosave Timer control for “Unvented Cylinder Megaflo Water heater” As the current Newlec Economy timer control limits to heat up full tank of water during midnight only( one time a day. ) OP Ecosave Timer control allows to set...
  19. D

    Electric boiler and an unvented indirect hot water cylinder

    Hi, I have recently purchased a cottage with an LPG combi boiler (no mains gas in the area). I intend to replace this with an electric boiler and an unvented indirect hot water cylinder. The boiler will run four radiators and the hot water cylinder. The cottage has one bedroom. What size (kw)...
    • DavidB
    • Thread
    • boiler cylinder electric hot water unvented water water cylinder
    • Replies: 5
    • Forum: Boiler Advice Forum
  20. J

    Plumber or electrician to replace new timer switch Unvented cylinder

    Replace the current E7 Newlec Economy control to a mechanical 24 hour timer switch for unvented cylinder water heater, may I know if I ask plumber or electrician to do this job. Because Newlec Economy controller can heat up water once a day in midnight .I would require constant hot water in...

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Featured Content

Back
Top