Is there a knack to installing them quicker? Seems to take me in order of 1-2 hours more than installing an Ideal. The wall jig needs like 4 screws to hang and needs quite a flat wall (Ideals and Vaillants hung with two screws then your whole boiler is on on wall) then you need to hang boiler...
I have a Worcester Bosch Oil Heatslave 26/32 which is about 17 years old. It has developed a fault that has come in stages so it might be more than one fault. It was fitted with the OEM programmer.
1. When the water heating is on, but the room heating is off, the boiler sometimes heats the...
ive been having problems with my boiler banging at night so ive had all my radiators changed and on Saturday had M C 3+ cleaner through the system and sentinel x100 inhibitor put in the boiler was fine that night
Sunday night about 3 in the morning the boiler banged then i could hear a woosh of...
Hey there,
I have a boiler (Heatslave 20/25) that had low pressure. I topped the pressure back up to 1 bar using the external filling pipe but the heating still won't come on.
Do I need to reset anything?
Thanks for any help
I have a worcester greenstar camray utility 12/18 oil boiler and we have not used the hot water for years on the boiler we use it for just heating as we have electric shower and dishwasher etc. This year we thought we would use the hot water, but on turning the hot water on it only heats the...
Hey. Fairly new to oil. Serviced above boiler Last week. All working fine but now had customer call to say it keeps going to lockout.
Been and looked today. Symptoms are the boiler ignition process will start. You can hear it sparking. The boiler will fire, run for around 1 min and flame will...
Hi, would welcome some advice/opinions please. I currently have a Remeha Avanta plus 28c (combi) which is 11 years old, still working in a fashion but beyond economic repair.
I have the opportunity to have a Worcester Bosch Greenstar 30i (Combi) installed using the boiler grant scheme...
Hi
So this morning I was having a shower and suddenly my hot water went completely cold. I jumped out and had a look at my boiler. I noticed that the burner had stopped and the reset button was flashing red. The blue oval shaped light in the middle was on and stable (it was blue). I reset the...
If the bath top shower is used by turning on the cold tap first, then the hot supply, it will give a consistent short shower, but that is getting shorter day by day before it goes cold.
If the hot is turned on first, then the cold, that will result in domestic supply going cold within a few...
Hi Guys,
Appears this timer/programmer maybe thinks its the wrong time since it was on at 1.00am this morning when it should have been off at 9.30pm.
Looked at it today and it is set to 'timed', but when I finished checking and making sure the the clock, date, year and CH & HW times were...
Hello everyone.
Looking for comments/advice please about my wife's latest request... Which is to remove the existing bath from an upstairs bathroom (apparently we don't like it anymore!) and replace it with a shower.
The hot water is from an external oil combi also feeding a second bathroom...
Hi. Our Worcester 30cdi makes a very loud rumbling noise after the hot tap is turned off. It seems to be worse if the hot tap is only run for a short time. The noise is getting worse since this video was done. Any advice gratefully received.
Hi there - I have a Worcester Greenstar 25Si combi boiler running our heating rads. I've recently added a small tank with a heating element powerd by solar into the rads circuit. It's producing good heat, but I need a circulation pump to be on to move the heat around the system. Ideally I'd like...
Hi, I am new gas safe registered. I serviced a old worcester R28 HE Z7-28 system Boiler. found negative fan pressure -3.95mb lower than MI's -4.2mb, Gas rate is 2.82 m3/h, little bit lower than MI'S 2.9M3/H, so clean heat exchanger very well. after that check fan negative pressure, -3.11mb...
Hi all
My sister is in the process of getting quotes for the installation of an oil central heating system (rural Cornwall) in an old house where none currently exists. For obvious reasons she is having trouble getting anyone out to quote at the moment apart from one local contractor. He has...
I have a Worcester heatslave 20/25 oil boiler leaking water from the automatic air vent do I need just too replace the vent or is there some other reason for the leak
Worcester 280 rsf. Heating works fine, hot water fires up but is only like warm. Now with heating demand I'm getting 240v at 3 port. With heating off and tap running it's only.luke warm. If I manually move motorized valve to left it gets upto temperature. Iam only getting about 4v on board with...
My boiler pressure gauge is at zero so the boiler is not firing up. I thought I heard a small water leak in the wall near the boiler the other night, just before this happened, but the leak has now stopped.
I have been reading other posts to try to find a solution and I've hunted everywhere...
Hi there hope you guys can help me, the boiler in my rental property has stopped giving hot water, i.e. now water at all. the central heating works fine, cold water works fine, but when i turn on the hot water i get nothing no water at all.
look forward to tour suggestions.
Many thanks Martin
Went to look at a leaking worcester combi 30cdi, and found it has a pinhole/hairline crack in the flow unit hydro block. (LHS bolts onto plate to plate heat ex)
Any tips or anything I should look out for when replacing the flow unit (87161063560) I don't do too much work on Worcester boilers...