work

  1. M

    How well does bunging the cold feed and Open vent work

    Have a radiator to swap. I'm thinking of piping back to the current supplies. The rad is slightly smaller. The connecting on the the old pipes at the end one by one. Would using bungs in the open vent a cold feed create enough of a vacuum for me to do this? Which a drain down. Thanks
  2. Lou

    Have you ever / would you ever; Work for a Plumbing Supplier / Plumbing Wholesaler

    Have you ever / would you ever; Work for a Plumbing Supplier / Electrical Wholesaler - POLLTIME! PLEASE SHARE THIS WITH FRIENDS VIA FACEBOOK, WHATSAPP, FACEBOOK GROUPS, OTHER FORUMS ETC WE WILL BE PUSHING THIS HARD FOR A FEW MONTHS. Please join in and help make the thread have lots of long...
  3. N

    Water Heating Wont Work Unless Tank Thermostat Is Turned up and Down Manually!

    Have a sytem boiler with unvented cylinder with 2 heating zones plus hot water in a house we moved into recently. To start with we were always amazed at the water pressure so on the odd occasion that the water was only luke warm it was easily forgiven, but over time we have come to realise that...
  4. S

    Moving pipe work for sink

    I want to remove my downstairs toilet sink and put a new more compact one on the adjacent wall. However there are two ring drain cocks at the bottom. I want to check that I should replicate the layout rather than just using elbow joints?
  5. Dan

    My Central Heating Doesn't Work - Master Thread

    I thought I'd create a master thread to move all of these similar threads into, over time like. If your central heating doesn't work boiler doesn't work radiators not working radiators or heating system is cold thermostat wont work or respond Then post a reply in this thread. Rather than us...
  6. M

    Exposed basin pipe work query?

    Hi folks I’ve been asked to first fix a basin that has the chrome waste exposed. My problem is that the basin isn’t on site to allow me to get an accurate height for the waste but I do have some dimensions. I will attach a pic if it helps. I’ve marked it out where the basin height is 870mm...
  7. R

    Coventry - groundwork pipe work needed

    I will need: install new 100mm pvc pipe work, 90-degree bend for new W/C install new 100mm pvc pipe work, 90-degree bend with new gully pot at rear of new extension for sink waste clean water pipe carry out 2 x Lead connections with a new T section No excavation needed, all is digged out.
  8. pulak25

    Inside water stopcock doesn't work. Want to check if the right one

    Hi, I have a stopcock in my closet at my flat, but despite me turning it clockwise all the way, this doesn't seem to be stopping the flow of water. Is there anyway I can check if that truly is the stopcock and if not, is there a way I can find the actual one? I just want to stop the water flow...
  9. L

    Is this why my new radiator does not work?

    Hello all, I live in a flat that has communal heating through a single pipe system. I recently had replaced a deco flat panel (waffle) radiator with a more mundane type 22 panel radiator. The problem is that the new radiator sort of worked in the beginning, but it does not emit any heat now...
  10. U

    Does anyone's heating actually work as intended with thermostat?

    Hi all, I keep reading about how you should use a smart thermostat. Set it to the temp to want the home to be and hey presto it takes care of itself. But realistically who does this or rather who does this work for. With mine I just use it to turn the heating on now and then for short periods...
  11. M

    2 soil stacks 1 vent - will it work?

    Hi, I'm wondering if this is allowed or will work in the UK. We currently have all our waste water connecting to a single vented stack. The pipes from the toilets etc connect to the vertical stack via a horizontal pipe as you would expect. I'm about to renew all the soil pipes. We have 2 entry...
  12. IMRS250

    Anyone work for Octopus? Airsource heat pump upskill role

    Hi all, I have recently returned to the industry and have applied to Octopus for the upskill role into air-source heat space installs. Does anyone work for them on here? Just wondered what people's thoughts were on them as a company and if anyone is fitting air source what they think of this...
  13. A

    Looking for work, close/in to Surrey

    Hello, I am Aiden longster and I am looking for some plumbing work. I have just completed my level 2 diploma and either looking for a level 3 apprenticeship or some work
  14. M

    TS 2 Instruction - how does it work

    Hi just moved into a flat with a TS2 remote sensor any ideas how it works
  15. 6

    Roofing replacements and repair work to properties with vertical flues

    Can anyone turn a boiler off to work around the flue for roofing as an example, as long as a registered gas engineer carries out the required checks and certification before turning it back on?
  16. plumbingnewbie

    Will a blanking cap work for this?

    Afternoon all, I have just removed a bathroom radiator and now wondering how to plug the end? Am I right in understanding that I should screw a 15mm blanking cap onto the end of this? Or do I need to install a compression stop? Thanks in advance for any help or advice
  17. N

    Is this changed domestic hot water system design going to work ok?

    Hi, We are having PV panels fitted which will dump the excess energy into our hot water tank. Our house originally had a large 210L economy7 hot water tank (cold tank in loft), but the hot water tank died 18 years ago. At that time we fitted a smaller 117litre tank and went for fitting electric...
  18. N

    Is this going to be work OK??!!!

    Hi, After years of using a pumped electric shower (Triton t80 pumped), it's now dying and I'd like to replace it with a 'normal' mixer shower running off the vented hot water tank as this is now largely heated by solar PV . When we first moved to the house there was a shower head coming off the...
  19. J

    looking for a self employed plumber for 2 weeks work in kingston

    I have approx 2 weeks work in kingston i need a qualified plumber to assist me with starting on the 30th may. must be self employed, own tools transport etc. good day rates paid. potential for more work after this job. please get in touch. Regards Alex
  20. D

    Has any one done work for ERG Facilities Limited

    Has any one done work for ERG Facilities Ltd

Featured Content

Back
Top