Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "18kw System Boiler to Replace Conventional Boiler" which is posted in Boiler Advice Forum on UK Plumbers Forums.

Status
Not open for further replies.
H

higgins79

What work would be involved in adapting my open vent system to put a system boiler in?I have been advised to do this as most heat only boilers are not much good.
I am not replacing the existing cylinder
What boiler would you recommend?
 
get some quotes from local Gas Safe installers, they will be able to give you best advice.

what type of open vented system is it? gravity, fully pumped . and what type of controls do you have?
 
It is a fully pumped system no room stat,Rads all trv,programmer controlled,open vented system
 
I'd imagine you'd have plenty businesses around your place that'd better advise you free of charge .... 🙂

For minimal disruption you're looking at an open system heat only boiler. Straight swap potentially apart from condensate.

System boiler will mean wiring and pipework alterations, position of feed and vent, sealed system etc.

I'd get a cupl of quotes as already mentioned 🙂
 
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

Reply to the thread, titled "18kw System Boiler to Replace Conventional Boiler" which is posted in Boiler Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top