Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Advice Please -Fitting 60cm dishwasher? CW Supply and Waste?? Options???" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Hi All

I am looking to fit a 600mm dishwasher, i will be fitting it under counter in a current 600mm 3 drawer carcass (i presume this is ok once all the drawres/side sliders are removed?)
From left to right i have sink unit (single waste outlet on trap/u bend), space for washing machine (600mm under counter), 600mm space for freestanding gas cooker, then i propose to fit the dishwasher in a 600mm ex 3 drawer carcass.

I have CW and HW end valves behind the w/machine and it's waste easily reaches the sink single waste connection.

I plan on swapping the CW end valve for a T type one (feed w/machine) and then extend the existing 15mm copper with plastic and correct inserts and reconnecting the end end valve to use on the d/washer.

Would this be ok to run behind a gas cooker?

Once i know what to do with this i will ask about the d/washer waste....

Cheers
 
It will not fit inside the carcass once you have removed the drawer runners- the carcass is 600 externally, inside it will be 570 at most.

You will have to remove the unit entirely, some arrangement will be needed to hold up the worktop ( if there is a worktop...)
 
It will not fit inside the carcass once you have removed the drawer runners- the carcass is 600 externally, inside it will be 570 at most.

You will have to remove the unit entirely, some arrangement will be needed to hold up the worktop ( if there is a worktop...)

Thanks for reply, its not even a 'unit' now tbh, it is just 2 side panels that can be moved to suit, so i can adjust the panels as needed, i presume they need to be 600mm apart internally?

Yes there is a worktop that i can use to fit brackets or a bit of 2x1 as necessary to keep them in place......
 
This is CW feed that i presume i can extend as above using a T.

Washing Machine 1.JPG

This is the current one outlet waste that i 'think' i can swap for a dual type for the dishwasher that is MAX 1.8m away....
 

Attachments

  • Sink outlet 1.JPG
    Sink outlet 1.JPG
    101.7 KB · Views: 40

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Advice Please -Fitting 60cm dishwasher? CW Supply and Waste?? Options???" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Joined
Location
Wales
Member Type
Other Tradesman

Thread Information

Title
Advice Please -Fitting 60cm dishwasher? CW Supply and Waste?? Options???
Prefix
N/A
Forum
UK Plumbers Forums
Start date
Last reply date
Replies
3
Unsolved
--

Thread Tags

Thread statistics

Created
bilabonic,
Last reply from
bilabonic,
Replies
3
Views
1,842

Weekly or Monthly Email Digest

Back
Top