Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Alpha CD28X no lights or power. (combi)" which is posted in UK Plumbers Forums on UK Plumbers Forums.

Status
Not open for further replies.

Allgoode

Gas Engineer
Hi all,
Just a bit of advice re this boiler.
Customer called to say no lights or operation at all in any mode.
Visited about 8pm on way back from other work and tested. power coming through to boiler but iaw instructions checking with multimeter nothing on the pins which led me to diagnose the PCB was gone.
There is no service coverage down here in Cornwall & boiler has broken before, previously under warranty and customer had issues getting coverage.
Is there something I have missed as was knackered when running through checks after long day.
Customer has indicated wants to discuss options so poss may go down route of new boiler sooner than later,
Thanks,
Andy
 
Was gonna say fast blow. It's then a case of what caused it to blow though
 
There's a couple of fast blow fuses on the PCB, normally the fan or divertor motors will cause the fuses to blow!
 
Last one of these I had diverter was letting water theough
 
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Alpha CD28X no lights or power. (combi)" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top