Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Barber Wilson kitchen tap leaking" which is posted in UK Plumbers Forums on UK Plumbers Forums.

1537089443115756126027.jpg
15370895374051206734902.jpg
15370895374051206734902.jpg
Hi all,
I inherited with my new house a lovely three piece Barber Wilson kitchen tap in polished brass finish, no longer so polished but looks great. I replaced the cylinder due to dripping cold tap.
I now have a new more worrying leak from the base of the riser swan neck. Water is seeping out from where the swan neck fits into the base. My question is do I need to replace the whole swan neck or is there a service part washer etc I can replace ?
tn5iKF18ZvyAz2wZ7
 
View attachment 34480 View attachment 34481 View attachment 34481 Hi all,
I inherited with my new house a lovely three piece Barber Wilson kitchen tap in polished brass finish, no longer so polished but looks great. I replaced the cylinder due to dripping cold tap.
I now have a new more worrying leak from the base of the riser swan neck. Water is seeping out from where the swan neck fits into the base. My question is do I need to replace the whole swan neck or is there a service part washer etc I can replace ?
tn5iKF18ZvyAz2wZ7
Is it where it swivels from ?
We love Barber Wilson proper English taps, almost certainly it can be repairs, most likely it is just a new 'O' seal required.
 
I have know idea how to remove it and strip it down. The brass is easily damaged so hesitant to start trying without knowing how to remove it to check parts.
 
New O ring required. Not sure how the spout is held in, most likely a small grub screw, speak to Barwil tomorrow & they should be able tell you & what size O ring you will need.
 
Any tips on undoing the nut? I've tried leather strap with vice grip, the extremely dilute vinegar on the top of the nut, and finally WD40 on the top of the nut, and no go. Just ordered the highest-rated strap wrench for polished pipes from Amazon... Hoping once I can get the nut off, the Barber Wilson "leak repair kit" (2-piece brass circle plus 3 o-rings) will do it. My faucet is a RFC1030.

btw, the aerator in the "leak repair kit" they sent me doesn't fit my model (drops below the bottom of the screw-on brass piece at the end of the swan neck). They don't seem to know who made the original aerator in my faucet (even though it's only about 12 years old): They said Neoperl, but Neoperl says it's not theirs, from photos I emailed them. Fortunately, my aerator isn't the issue. At least not now.
 
I have a leak in my Barber Wilsons China 1010, got a new cartridge and tried to install but still leaking...both pillars to the counters are leaking to. Any ideas how to fix? I love this faucet and do not want to replace...
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Barber Wilson kitchen tap leaking" which is posted in UK Plumbers Forums on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Joined
Location
Solihull
Member Type
DIY or Homeowner

Thread Information

Title
Barber Wilson kitchen tap leaking
Prefix
N/A
Forum
UK Plumbers Forums
Start date
Last reply date
Replies
9

Thread Tags

Thread statistics

Created
WPr,
Last reply from
Sarahbeth Wintringer,
Replies
9
Views
8,183

Weekly or Monthly Email Digest

Back
Top