Best Multimeter for testing Central Heating and Boilers?

[MikeJhn]

TIS Autoranging Digital Multimeter

Pocket size auto-ranging digital multimeter for measuring temperature -20°C to 1000°C, -4°F to 1832°F, AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle and diode test. Features 4000 count digital display, data hold, backlit display and continuity buzzer. Protected by...

www.toolstation.com

Got 1 last year - auto ranging - all good - didn't break the bank.

Only auto ranging if you turn the dial to the correct position and will not tell you that the lead is in the wrong place, I don't think I could ever go back to a manual dial now, having used the Testo for a year or so.

 

[Jim09876]

Hehehe imagine spending £££ on a multimeter...same guys rolling around in a 2019 van, alloy wheels and private plate “GAS MAN”

 

[MikeJhn]

Nah BMW M5.

 

[macka09]

really? Can’t get a plumber or 'Registered Professional Gas Engineer' around here at all

Yes mate. I normally sub to a company who have been hit quite bad work wise. Also the little town I live in has recently had a massive influx of plumbers to the area. 5 years ago there was 3 local guys now there’s about 19 advertising.

 

[Murdoch]

Yes mate. I normally sub to a company who have been hit quite bad work wise. Also the little town I live in has recently had a massive influx of plumbers to the area. 5 years ago there was 3 local guys now there’s about 19 advertising.

you have have got too many eggs in too few baskets ...

 

[macka09]

you have have got too many eggs in too few baskets ***

I dont think I've got any baskets if I'm honest.

 

[Murdoch]

I dont think I've got any baskets if I'm honest.

you should be employed if that’s the case .....

 

[macka09]

you should be employed if that’s the case ***..

I wouldn’t mind PAYE if the rates were right. No company I’ve been on the books with pay a decent rate