Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Boiler repair costs" which is posted in Boiler Advice Forum on UK Plumbers Forums.

Status
Not open for further replies.
B

buckley plumb

Just a thought how much would others advise customers to spend max before advising new boiler. I will start with a few makes
£200 max on ferroli or biasi
Customer. Today Had vaillant turbo max plus and was not happy when I advised renewing rather than spending £450 on it
 
People get attached to there old boilers...

What was wrong with the turbomax out of interest, my bro has a really old one but it keeps on going! Just needed a diverter & plate heat 🙂
 
I will repair any boiler at what it costs if parts are available. I will offer my advice but they don't have to take it. At the end of the day its all work
 
Landlord spent nearly 700 on an old oil heatslave. It's still a rusty pile of poop though.
 
If a boiler or anything else for that matter has more problems than Syria then it's gotta to be changed. It comes down to common sense really.
 
I will repair any boiler at what it costs if parts are available. I will offer my advice but they don't have to take it. At the end of the day its all work

Exactly, you can only offer your advice. It is not your decision and not your money to spend. I will give an honest evaluation and two prices, one to repair and one to replace. I will happily do whatever the customer decides.
 
Exactly, you can only offer your advice. It is not your decision and not your money to spend. I will give an honest evaluation and two prices, one to repair and one to replace. I will happily do whatever the customer decides.

Exactly what I do, then put my advice in writing to cover my backside. Probably around 20% I see again within the year to replace the sani but it`s up to the customer to toss the coin not me.
 
People get attached to there old boilers...

What was wrong with the turbomax out of interest, my bro has a really old one but it keeps on going! Just needed a diverter & plate heat 🙂

Turbo max plus. Diverter and plate and sensor. Merchants quoted £250 for plate and diverter. I can get cheaper on line but don't like getting off line. Vaillant offer one off repair for £300 I always advise customer of cheapest option.
 
quoted £275 for aps and pcb on a ideal classic nf 80 today, and warned the fan may still be the issue. Customer went no thanks, bought an intergas rapid and asked me to install it as a heat only for now. Only problem is I dont have any spare time to do it!!!!

I could have wacked the parts in in an hour though!!!
 
Problem being is when you do a repair at £300 on a 12 year old boiler and the following week another issue arises . I went to a potter ton lynx other day was years old and was in a right state told them couldn't get parts and advised new boiler, never heard a jot back .

probably thought i was trying it on .
 
only mistake I made was not to charge on my initial visit, but they are a young poor family so I am feeling the xmas spirit at present🙂
 
Tbh, if I feel a boiler needs to much spending on it, and I think there more stuff lurking. I walk away, I dont need crappy phone calls telling me how much they've just spent.
 
Status
Not open for further replies.

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Boiler repair costs" which is posted in Boiler Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Weekly or Monthly Email Digest

Back
Top