Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Can I adjust the hot/cold water flow into a shower head?" which is posted in Showers and Wetrooms Advice on UK Plumbers Forums.

N

Nicolinalee

I’m hoping someone can help me. I’ve had a bathroom installed, and the whole process has been a nightmare. The plumber has now disappeared, and left things half finished. Some stuff I can sort (toilet and towel rail not actually being secured to the floor, bath not sealed around, leaking bath overflow etc), but the biggest issue is with my shower, which is connected to the combi-boiler.

Even on the coldest setting, it is far too hot! The shower and pipe work was newly fitted by this plumber. There were definitely two pipes for hot and cold, but it is impossible to run it cold. I have no idea why this could be? Could anyone hazard a guess, and is it an easy fix? The pipework has been plasterboarded and tiled over, but I think the bottom part of the pipes should be accessible behind the bath panel.

Any help would be so appreciated, as the plumber is ignoring my calls and messages.
 
Sounds like crossed pipes. If the pipes are accessible under the bath, try to figure out which is the cold pipe, run the shower on cold only and feel the pipe.
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Can I adjust the hot/cold water flow into a shower head?" which is posted in Showers and Wetrooms Advice on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread Information

Title
Can I adjust the hot/cold water flow into a shower head?
Prefix
N/A
Forum
Showers and Wetrooms Advice
Start date
Last reply date
Replies
1
Unsolved
--

Thread statistics

Created
Nicolinalee,
Last reply from
Deleted member 120897,
Replies
1
Views
785

Weekly or Monthly Email Digest

Back
Top