Close Couple Kit

[verdigrey]

Hello All , Could do with some help please . Is it possible to buy a close couple kit where the metal plate is flat , not raised where the bolt slots are ? I did a job recently where I had to replace the syphon and the plate was very rusty , tried replaceing it with the modern raised style , but it didnt fit . I just put the old one back with plenty of silicone and no probs so far . It is bound to happen again though and just wondered if anyone knows of a supplier ? I guess I could make some out of steel plate , but I would rather not spend time doing it . Thanks .

 

[Puddle]

Could try here 🙂


[DLMURL="http://www.partridgeshadleigh.co.uk/catalog/do-it-yourself-plumbing-toilet-spares-pan-to-cistern-close-couple-fitting-kit-for-ideal-standard-p-4918.html"]Pan To Cistern Close Couple Fitting Kit For Ideal Standard [CCKI] [] [] - £4.50[/DLMURL]

 

[dontknowitall]

Would a new (fatter) doughnut washer help?

 

[verdigrey]

Thanks Puddle , Have looked at that website and those kits look just right , I will send for a couple . Cheers .
Cheers Dontknowitall , I guess a thicker doughnut washer might have worked if I had got one with me . Byall .

 

[REDSAW]

toolstation £2.50, dohnuts available on their own.icing extra.

 

[victorianbathro]

I think it's possible also. You better start checking in your local and on the internet.

 

[verdigrey]

Hey Guys , Just found a Website that stocks Ideal Standard C/C kits at a reasonable price and a few other things that I cant easily get elswhere like 28mm nail on Pipe clips , it is gofix it plumbing supplies its based in Oldham ( i told um ) Lancs . Hope that helps .