K krislee Nov 6, 2022 #1 I'm getting an e119 error which I assume is low water pressure. I'm turning the 2 valves that I think should increase pressure but I'm not getting anything. Any ideas? Attachments 20221106_193523.jpg 213.7 KB · Views: 44
I'm getting an e119 error which I assume is low water pressure. I'm turning the 2 valves that I think should increase pressure but I'm not getting anything. Any ideas?
K krislee Nov 6, 2022 #2 Or should I be turning these 2 instead??? I can't really see where a 'filling loop' would be? Attachments 20221106_194207.jpg 253.2 KB · Views: 35 Upvote 0 Downvote
Christopher buzzard Gas Engineer Nov 6, 2022 #3 not the red 1s you circled but the blue knobs i circled. The 2nd 1 isn’t in your picture but it looks the same. Attachments D5F4178B-90D9-46E4-AB5F-DE3E1126BDC4.jpeg 220.5 KB · Views: 34 Upvote 0 Downvote
not the red 1s you circled but the blue knobs i circled. The 2nd 1 isn’t in your picture but it looks the same.
K krislee Nov 6, 2022 #4 Oh great! I'll try that! There are two there, as you mentioned. Thanks! Upvote 0 Downvote
K krislee Nov 6, 2022 #5 That did the trick!!! Thank you so much! Very much appreciated on this chilly night! Upvote 0 Downvote