Essential things in our trade

[centralheatking]

I use my iPad all the time to direct people etc. but my beloved Makita HR 2410 Sds after 20 years is ill,
It’s going into care Saturday ...what a machine three sets of brushes in 20 years used every day ..used and abused done big holes with wide core bits way beyond its spec . If I have to will get another but will wait for the prognosis
Have a good weekend all .....Centralheatking

 

[Last Plumber]

Take it some grapes and a magazine! It may need cheering up a bit.

 

[turnpin]

Let's hope it makes a cheap and speedy recovery lol.....regards Turnpin🙂

 

[Stu-B]

Is it like trigger broom? I’ve had this drill for 20 years...... 6 new motors 2 new cases 3 new chucks 4 new triggers....

 

[centralheatking]

Let's hope it makes a cheap and speedy recovery lol...regards Turnpin🙂

Update , my Makita is fixed , dropped it off at our local hire shop 8.00am .which has their repair workshop at the rear .they said maybe a few days
Anyway call on way back from Southport ..New Power Cord, and new brushes ..works spot on
£25.00 plus more at my discretion as always with these boys ...Chking

 

[turnpin]

Happy days......lol regards Turnpin🙂

 

[king of pipes]

Brought back to life CHK sweet ,I am a Makita user got most of their stuff . Cheers Kop

 

[Stigster]

I recently had a double tool loss. I was working on a concealed toilet cistern and dropped my slim jaw Bahco down into the cavity and it went down an abandoned open ended 4" pipe that was cut flush with the floor. I got my big magnet out and lowered it down on a string, hoping to pick up the spanner. I was excited to hear it snap on to the lost tool but quickly found the whole lot to be stuck. I couldn't even pull the magnet back out so I lost that too.

I don't use it every day but I think a slim jaw spanner is an essential where another adjustable won't fit. I'll have to get another one.

The building is likely to be demolished in the next few years so I'll see if I can get it back then.

 

[Last Plumber]

Update , my Makita is fixed , dropped it off at our local hire shop 8.00am .which has their repair workshop at the rear .they said maybe a few days
Anyway call on way back from Southport ..New Power Cord, and new brushes ..works spot on
£25.00 plus more at my discretion as always with these boys ...Chking

Could I have the grapes and magazine then?