Fitting new seal. Worcestor 28i junior

[zeebeedee]

Any tips for this? Had a nightmare today changing electrodes fitted the new seal and it took me ages to get the fan back due to the thickness of the new seal!

 

[JAH HEATING]

Stay away from Worcester 🙂

 

[lame plumber]

took seconds at the wb demo 🙂

 

[zeebeedee]

Can someone move this to the private Gsr only forum please.

 

[lame plumber]

you can trust a trusted to get it wrong 🙂

 

[EPH]

Put the nut on that pulls the plate down a few turns first.

Lock the fan in then tighten up. Fan and seal change normally takes half an hour.

 

[zeebeedee]

Put the nut on that pulls the plate down a few turns first.

Lock the fan in then tighten up. Fan and seal change normally takes half an hour.

Took me about an hour today nightmare it was! The fan kept hitting the flow pipe when it twists in! Took me a lot of strength to get it in

 

[Dotty]

Moved to private forum.

Use a spare m10 nut to clamp the plate down and give yourself a touch more room..

 

[TBServices]

Moved to private forum.

Use a spare m10 nut to clamp the plate down and give yourself a touch more room..

How the fuuuuu do you even know that?

I feel your pain anyway, terrible design.