Franke Mini Tap

[Chrisj]

How can i remove the head from a Franke Mini Tap so i can replace the valve?

 

[REDSAW]

any pictures?.

 

[Chrisj]

Photo of the top of the head with the cap removed. I was expecting to see a screw holding the head on.

 

[REDSAW]

is it one of those onyx tap heads?.
if so the screw is missing and it should just pull off, stick some wd40 in it before to ease it. the plastic bit inside tends to crumble of tho.

 

[Chrisj]

Not a onyx tap head i think as it is on a franke triflow tap. What is the plastic bit called if i have to try and get a replacement?

 

[REDSAW]

some sort of spline adapter i think. and i doubt you will get one.
proberbly best to put on tap revivers if no good.

 

[Chrisj]

OK. Thanks for your help.

 

[WHPES]

Can you get a mini bearing puller on it? Often works for me.

Take it off and pour boling water over it and try and get off whilst still hot.