Franke Rotaflow - removing spout

[kwajimu]

I have a Franke Rotaflow and it is leaking from the base of the spout. I have unscrewed the cap, but cant see how to remove the spout. there is no screw and on other taps I have fixed you would turn it 90 degrees and it could pop out.

Is there a trick to how to remove the spout so I can replace the O-rings?

Thanks in advance.

 

[Paulus]

If you have unscrewed the collar, the spout should just pull out. They usually take a bit of pulling but I am pretty much certain that nothing else holds the spout in.
Diagram from central services website

 

[kwajimu]

Thank you.

I had looked at that diagram and it didn't look as though there was anything more to it than a good yank.

I have half heartedly tried that already, but wasnt sure if I was missing something and would end up breaking it. I will just have to give it some welly!

Thanks for replying