Gas sizing for two 100kw boilers

[ashling]

Can any give me some technical advice on pipe sizing for two 100kw (Worcesters) gas boilers they will be fitted 3m from the meter. Pipe run straight with only a couple of bends max. Could you please advice if pipe needs to be painted yellow or can it simply be marked with gas tape.

 

[P J F PLUMBING]

If you are installing big toys like this surly you should know how to do something from page one acs ???

 

[Kyle87]

If your not GSR......you may not get the answers here

 

[P J F PLUMBING]

If your not GSR......you may not get the answers here

If your not gsr you won't get the answers here

 

[snowhead]

There's a lot of information missing to give an accurate guide as to the correct sizing, so assumptions will have to be made;

First one the O.P is NOT GSR Commercial.

The pipe sizing was a maybe, asking about paint or tape was the give away.

 

[Orry Clayton]

Even if you are GSR, you'll not get the answer. One of the most basic things is pipe-sizing.

 

[AWheating]

you can gain access to most relevant information/regs for a decent price via the gas safe register engineers website. stuff like igem and bsi its about £75 for a year.

 

[Howsie]

"It will be straight apart from a couple of bends" 🙂

 

[heliotrope]

Can any give me some technical advice on pipe sizing for two 100kw (Worcesters) gas boilers they will be fitted 3m from the meter. Pipe run straight with only a couple of bends max. Could you please advice if pipe needs to be painted yellow or can it simply be marked with gas tape.

:rofl::rofl::biggrinjester::rolleyes2::troll:

 

[LPC]

Scary post. Very scary.