Hi all,
I was just posting on here to see if anyone has had anything similar or can point me in right direction…
I have a Geberit concealed tank within the wall so a floating toilet and over recent weeks have found that the brick work just outside of the toilet area (downstairs toilet) has become wet and damp and you can see it is wet.
The area is just behind where the toilet is located. Within the bathroom area there are no leaks / water evident since I’m an guessing it is leaking outside of the tank area (a connection or valve etc).
I have done some research myself and aware you can replace the cistern washer seal however as I don’t hear any water running and no water leaking into pan I am not sure whether this is my issue.
I am going to take it apart to inspect further and replace that seal as cost effective but struggling to see how this is my issue.
If anyone has any suggestions or advice it would be much appreciated 🙂.
Many thanks in advance,
Pete
I was just posting on here to see if anyone has had anything similar or can point me in right direction…
I have a Geberit concealed tank within the wall so a floating toilet and over recent weeks have found that the brick work just outside of the toilet area (downstairs toilet) has become wet and damp and you can see it is wet.
The area is just behind where the toilet is located. Within the bathroom area there are no leaks / water evident since I’m an guessing it is leaking outside of the tank area (a connection or valve etc).
I have done some research myself and aware you can replace the cistern washer seal however as I don’t hear any water running and no water leaking into pan I am not sure whether this is my issue.
I am going to take it apart to inspect further and replace that seal as cost effective but struggling to see how this is my issue.
If anyone has any suggestions or advice it would be much appreciated 🙂.
Many thanks in advance,
Pete