Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Getting air out" which is posted in Air Sourced Heat Pumps Advice Forum on UK Plumbers Forums.

I have an ecoFit pure recently installed and hear what sounds like air circulation as the boiler fires up the CH from cold. None of the rads are cool at the top suggesting they've been bled correctly.

How would I go about removing the rest of the air? Previous boiler (in the same location) did not do this.
 
If you know what you are doing then you can get into some parameters on the boiler controls there is a purge phase which should help, but you should really get your engineer back as this is part of the commissioning of the boiler
 
If its persistent, like for more than a week then I'd recommend getting the installer back.
Going back to issues like this is part of the job that you've already paid for.
 
Thanks. Pain that I only notice when it's starts from cold, not once warm, so difficult to reproduce on demand when he turns up, or prove he's fixed it...

Is it symptomatic of anything in particular, in general?
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Getting air out" which is posted in Air Sourced Heat Pumps Advice Forum on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Joined
Location
SE UK
Member Type
DIY or Homeowner

Thread Information

Title
Getting air out
Prefix
N/A
Forum
Air Sourced Heat Pumps Advice Forum
Start date
Last reply date
Replies
3
Unsolved
--

Thread Tags

Tags Tags
None

Thread statistics

Created
Wibbly,
Last reply from
Wibbly,
Replies
3
Views
1,185

Weekly or Monthly Email Digest

Back
Top