B
Bob1256
Hi new to this but have looked for similar everywhere and no joy! I have a glowworm betacom 30 5 years old. All hot water taps are ok apart from shower mixer, no hot water but when I run the hot tap a bit as well, the shower goes hot. I have replaced the mixer so won't be that and have checked the hot & cold connections are at the right valves. Also, when I run the CH the shower goes hot? I have checked the DHW inlet filter and shower filter?? Help please!
I should add, I did some pipe-work modification to the MCW (putting in 4No bends with 2No flexi-pipe) I now know this was wrong so have put everything back to as-was, still the same problem tho.
I should add, I did some pipe-work modification to the MCW (putting in 4No bends with 2No flexi-pipe) I now know this was wrong so have put everything back to as-was, still the same problem tho.
Last edited by a moderator: