Glowworm swiftflow 80

[buckley plumb]

Tested everything on this today aps /0 press sw /overheat stat /pump / fan transformer
Boiler fan would run and pump when heating was called. When hw was turned on pump would stop as it should as it's twin heat exch. Got to be pcb but I am not throwing an expensive board on it. Trying to get customer to have new boiler

 

[Ray Stafford]

I'm gobsmacked that there's a swiftflow out there still working!

Most of them didn't survive commissioning. If one reached its first service, you called it "grandad". 🙂

 

[Dotty]

Moved off open forum.

 

[buckley plumb]

Moved off open forum.

Sorry though it was in private

 

[buckley plumb]

I'm gobsmacked that there's a swiftflow out there still working!

Most of them didn't survive commissioning. If one reached its first service, you called it "grandad". 🙂

Fixed a servo warm 50 elite the other day. Thermocouple and pump. Think the interupter lead assy is playing up and don't think they are available taking the swift flow out soon