guys...how much you chargin to fit new combi system with 9 rads

[moogwai]

just pricing up a job fellas and was wondering how much you guys would be chargin to fit a combi system with 9 rads on??
gotta strip the old system with a ideal etype boiler on (it has 28mm circs...yum yum!!!but reduces down to micro bore to feed rads.) and the system just dont work!!! pipes all over the place and drawing massive amounts of air in...only 1 rad out of 7 gets luke warm!! so ive decided to renew the lot

 

[dontknowitall]

Break it down into what you can do each day, count the days and multiply by your day rate, add materials and you shouldn't be too far off.

 

[wards]

depends on combi supplied and quality of materials used.give the customer the option and take it from there.🙂

 

[REDSAW]

easy £400 per rad.

 

[jambo]

gonna say on a worcester 37cdi 8 rads 1 bypass dt20 rf room stat up here in angus scotland would be looking at £4500 commisioned 2 days work

 

[moogwai]

ok guys thanks for your advice...think a 28i junior will do the job,calculated total btu's of job and i'm looking at somewhere in the region of 14000btu's.
only one bathroom in the house with an electric shower so don't need the hotwater output of a cdi or even the si.
was thinkin of supply & fit for £3000 and the customer should be able to claim the £400 scrappage back.
should only take me 3 days to do and work is a little quiete so will do it on my own,and the amount of copper that's on the current system along with the cylinder should net me around £120 so i could make a grand easily.

 

[jambo]

sweet as