HALL of SHAME PHOTo`s

[stani]

Awesome, will have to remember that just in case, you never know!

 

[ShaunCorbs]

Awesome, will have to remember that just in case, you never know!

the original installer phoned me up to say why he had put the loop in and they reason was it all wouldn't fit if he had used an pressure vessel and the other kit, so 1 day later and i sent him these pics back 😀 saying you said what wouldn't fit, never had a response tho

mods if not allowed plz remove

 

[Aquaman]

I could spend all day in here just reading over and looking at some of the pictures! funny but horrendous work!

 

[BN9Pete]

This 'outside tap' made me laugh, the customer could water his lawn without using a hose :smile5:

 

[voivod]

View attachment 21804

This 'outside tap' made me laugh, the customer could water his lawn without using a hose :smile5:

green thinking...very eco friendly lol

 

[voivod]

View attachment 21804

This 'outside tap' made me laugh, the customer could water his lawn without using a hose :smile5:

green thinking...very eco friendly lol

 

[Aquaman]

Lol, some people are clueless!

 

[julesverne]

Didn't realise I'd been doing it wrong all these years chip board on brick walls walls.

You do really have to wonder about some so called professional tradesmen.

 

[julesverne]

Didn't realise I'd been doing it wrong all these years chip board on brick walls walls.

You do really have to wonder about some so called professional tradesmen.View attachment 21870

 

[dave1]

Radiator plug used to isolate a gas cooker point.

 

[dave1]

who needs a heat mat?

 

[Billy Bob Bob]

feeding a 105 e,FFS lazy bastids,been like this for 12 years,easy to upgrade the gas,boiler in loft,gas meter 40 ft below it with a strait external run,which is what we are now doing

 

[Dotty]

Well, it's plastic....

 

[Dotty]

Oh, why won't you go the right way up?

 

[ShaunCorbs]

Oh, why won't you go the right way up?

never fear shaun is here

 

[Ermintrude]

I need not say anything

 

[ShaunCorbs]

where's the clips 😀 and support for the cylinder

 

[Ermintrude]

If only I knew who installed it I could ask them.....

 

[ShaunCorbs]

If only I knew who installed it I could ask them.....

go to builder centre and ask who had an f and e tank on the 14/1/14 😀

 

[LPC]

never fear shaun is here

What is that thing on the gas pipe?

 

[ShaunCorbs]

What is that thing on the gas pipe?

emergency solenoid shut off valve (prob linked to stop buttons)

 

[Dotty]

emergency solenoid shut off valve (prob linked to stop buttons)

Correct. There's a gas safety panel connected to a low level gas sniffer (it's lpg) which knocks the solenoid of in the event of an emergency, a leak or an internal fault.

 

[ShaunCorbs]

Correct. There's a gas safety panel connected to a low level gas sniffer (it's lpg) which knocks the solenoid of in the event of an emergency, a leak or an internal fault.

did you correct the faults?

 

[ShaunCorbs]

good old new build plumbers

(ignore the level valve )

being held via the flush pipes, and yes them little pita flex valves were the only iso other than the main 2" stop valve

 

[Dotty]

did you correct the faults?

Nah. It was a quoted service in a school. Remedials go in a report back to the office for them to issue a quote.

Unless it affects safety or operation in which case it'd be an immediate remedial.