View the thread, titled "HALL of SHAME PHOTo`s" which is posted in UK Plumbers Forums on UK Plumbers Forums.

20160331_101122.jpg

Couldnt miss this one 🙂
 
This was the solution to a wrongly installed flue that I raised a couple of months backimage.jpg
 
soldering is interesting 😀

Looks like they wipe the joints. I think that is fine to do with leaded soldering and looks alright if done neatly. But I think a lot of that is rough and also it has been more like spreading solder all over.
I still think there is something wrong with the pipework. Looks like the bypass is irrelevant as the pipes are already joined. Or am I wrong?
 
Looks like they wipe the joints. I think that is fine to do with leaded soldering and looks alright if done neatly. But I think a lot of that is rough and also it has been more like spreading solder all over.
I still think there is something wrong with the pipework. Looks like the bypass is irrelevant as the pipes are already joined. Or am I wrong?

Looks like they've uses half a roll on that bottom tee
 
thats what got my attention first 😀

and best bypass looks right

after pump but before mv

not straight tho which is - points 😀

But behind the bypass valve, - it looks in photo as if the pipes are joined together with a tee off going to an elbow?
 
I arrived to service a Warmflow combi oil boiler that was in constant use and looked on the outside wall and asked the guy where the flue was. He said, It is in here somewhere, and started to pull the turf up to reveal this. image.jpg

And the boiler room is part of the basement of the house and the young couple have a baby.
 
Last edited:

Official Sponsors of Plumbers Talk

Reply to the thread, titled "HALL of SHAME PHOTo`s" which is posted in UK Plumbers Forums on Electricians Forums.

Weekly or Monthly Email Digest

Back
Top